Application of a Model-Based Controller for Improving Internal Combustion Engines Fuel Economy
Open Access
Abstract
Improvements in internal combustion engine efficiency can be achieved with proper thermal management. In this work, a simulation tool for the preliminary analysis of the engine cooling control is developed and a model-based controller, which enforces the coolant flow rate by means of an electrically driven pump is presented. The controller optimizes the coolant flow rate under each engine operating condition to guarantee that the engine temperatures and the coolant boiling levels are kept inside prescribed constraints, which guarantees efficient and safe engine operation. The methodology is validated at the experimental test rig. Several control strategies are analyzed during a standard homologation cycle and a comparison of the proposed methodology and the adoption of the standard belt-driven pump is provided. The results show that, according to the control strategy requirements, a fuel consumption reduction of up to about 8% with respect to the traditional cooling system can be achieved over a whole driving cycle. This proves that the proposed methodology is a useful tool for appropriately cooling the engine under the whole range of possible operating conditions.Keywords
This publication has 33 references indexed in Scilit:
- Impact of Cooled EGR on Performance and Emissions of a Turbocharged Spark-Ignition Engine under Low-Full Load ConditionsSAE International Journal of Advances and Current Practices in Mobility, 2019
- A Comparative Analysis of Active and Passive Emission Control Systems Adopting Standard Emission Test CyclesSAE International Journal of Advances and Current Practices in Mobility, 2017
- The Future of the Internal Combustion Engine After “Diesel-Gate”SAE International Journal of Advances and Current Practices in Mobility, 2017
- A numerical procedure for the calibration of a turbocharged spark-ignition variable valve actuation engine at part loadInternational Journal of Engine Research, 2016
- Simulation and experimental validation of the flow field at the entrance and within the filter housing of a production spark-ignition engineSimulation Modelling Practice and Theory, 2014
- A novel engine cooling system with two circuits operating at different temperaturesEnergy Conversion and Management, 2013
- Vehicular Emissions in ReviewSAE International Journal of Engines, 2012
- Antriebsentwicklung Der ZukunftATZextra, 2011
- Energy Efficiency Analysis of Monolith and Pellet Emission Control Systems in Unidirectional and Reverse-Flow DesignsSAE International Journal of Engines, 2009
- 2-step Variable Valve Actuation: System Optimization and Integration on an SI EngineSAE International Journal of Advances and Current Practices in Mobility, 2006