Analysis and design of class-E/sup 2/ DC/DC converter
Authors:
- 1 April 1990
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 37 (2) , 173-183
Abstract
A family of class-E/sup 2/ DC/DC power converters is introduced. Their analysis and design are presented and experimentally verified. The converters are composed of class-E inverters and class-E rectifiers. Zero-voltage switching (with low dv/dt) of the transistor and zero-current switching (with low di/dt) of the rectifier diode reduce switching losses in both stages of the converters, making them especially suitable for high-frequency operation. Because of the high loaded quality factor of the resonant circuit, the range of frequency required for output-voltage regulation is as narrow as 5.46% for load resistances from a full load of 100 Omega to an open circuit. The full-load overall efficiency is 80.36% at 1 MHz. The converters can also operate at a fixed frequency if synchronous rectifiers are applied. The reduction of class-E/sup 2/ converters to lower order converters is presented. Many multiresonant converter topologies are created in this way. The class-E/sup 2/ converters can be utilized to build highly efficient high-power-density switching power supplies.<>Keywords
This publication has 22 references indexed in Scilit:
- Optimal topologies of resonant DC/DC convertersIEEE Transactions on Aerospace and Electronic Systems, 1989
- Class E tuned power amplifier with antiparallel diode or series diode at switch, with any loaded Q and switch duty cycleIEEE Transactions on Circuits and Systems, 1989
- Class E/sup 2/ narrow-band resonant DC/DC convertersIEEE Transactions on Instrumentation and Measurement, 1989
- Class E Power Amplifiers and Frequency Multipliers with finite DC-Feed InductanceIEEE Transactions on Circuits and Systems, 1987
- Exact analysis of class E tuned power amplifier at any Q and switch duty cycleIEEE Transactions on Circuits and Systems, 1987
- Class E tuned power amplifier with nonsinusoidal output voltageIEEE Journal of Solid-State Circuits, 1986
- Class E tuned power amplifier with shunt inductorIEEE Journal of Solid-State Circuits, 1981
- Idealized operation of the class E tuned power amplifierIEEE Transactions on Circuits and Systems, 1977
- Resonant switching power conversion technique1975
- Class E-A new class of high-efficiency tuned single-ended switching power amplifiersIEEE Journal of Solid-State Circuits, 1975