Long‐term thermal conductivity of cyclopentane–water blown rigid polyurethane foams reinforced with different types of fillers
- 19 July 2019
- journal article
- research article
- Published by Wiley in Polymer International
- Vol. 68 (10) , 1826-1835
Abstract
An understanding of the long‐term thermal conductivity of rigid polyurethane (RPU) foams presents great interest in the building field considering the conservation of energy efficiency. In this study, the effect of different types of particles (talc, diatomaceous earth and non‐porous silica) on the thermal conductivity of RPU foams blown with cyclopentane and water as blowing agents was investigated during 3 years of aging. The characterization of the cellular structure shows how the addition of particles causes a cell size reduction of the foams, and consequently an enhancement of the thermal properties just after production. However, this initial reduction is not maintained, because each foam shows a different thermal conductivity evolution with time. We have found, for the first time, a relationship between the slope of the thermal conductivity versus time at the first measurements and the internal temperature reached during the foaming process. The evolution of the RPU foams in which higher internal temperatures were reached is more pronounced than in those RPU foams where lower foaming temperatures were observed. This effect is related to the kinetics of the diffusion of the gas occluded inside the cells and imposes a new criterion for the selection of particles to reduce the thermal conductivity of RPU foams; these additives should ideally decrease the temperature reached during the foaming process. Moreover, the effect of aging on the thermal conductivity is explained by using theoretical models. © 2019 Society of Chemical IndustryKeywords
Funding Information
- Consejería de Educación, Junta de Castilla y León (VA275P18)
- Ministerio de Economía y Competitividad (MAT2015‐69234‐R, RTC‐2016‐5285‐5)
This publication has 23 references indexed in Scilit:
- Characterization of the cellular structure based on user-interactive image analysis proceduresJournal of Cellular Plastics, 2013
- 3D Analysis of the progressive modification of the cellular architecture in polyurethane nanocomposite foams via X-ray microtomographyEuropean Polymer Journal, 2013
- Mechanics of Nano-Honeycomb Silica Structures: Size-Dependent Brittle-to-Ductile TransitionJournal of Nanomechanics and Micromechanics, 2011
- Nanodispersions of carbon nanofiber for polyurethane foamingPolymer, 2010
- Influence of nanofillers on thermal insulating properties of polyurethane nanocomposites foamsPolymer Engineering & Science, 2007
- Aging of Rigid Polyurethane Foams: Thermal Conductivity of N2 and Cyclopentane Gas MixturesJournal of Cellular Plastics, 2005
- Long‐term performance of environmentally‐friendly blown polyurethane foamsPolymer Engineering & Science, 2005
- New experimental method for determination of effective diffusion coefficient of blowing agents in polyurethane foamsPolymer Engineering & Science, 2004
- Aging of Polyurethane Foam Insulation in Simulated Refrigerator Panels—Two-Year Results with Third-Generation Blowing AgentsJournal of Cellular Plastics, 2001
- Aging of polyurethane foamsInternational Journal of Heat and Mass Transfer, 1986