Vehicle Loads for Assessing the Required Load Capacity Considering the Traffic Environment
Open Access
- 6 April 2017
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 7 (4) , 365
Abstract
The effects of traffic loads on existing bridges are quite different from those of design live loads because of the various traffic environments. However, the bridge maintenance and safety assessment of in-service bridges maintain the design load capacity without considering the current traffic environment. The real traffic conditions on existing bridges may require a load capacity that is considerably different from the design. Therefore, the required load capacity of an existing highway bridge should be determined according to the extreme load effects that the bridge will experience from the actual traffic environment during its remaining service life for more rational maintenance of the infrastructure. A simulation process was developed to determine evaluation vehicle loads for bridge safety assessment based on the extreme load effects that may occur during the remaining service life. Realistic probabilistic traffic models were used to reflect the actual traffic environment. The presented model was used to analyze the extreme load effect on pre-stressed concrete (PSC) and steel box girder bridges, which are typical bridge types. The traffic environmental conditions included the traffic volume (2000–40,000), the proportion of heavy vehicles (15–45%), and the consecutive vehicle traveling patterns. The spans of the sample bridges were 30 m (PSC bridge) and 45 or 60 m (steel box girder bridge). In the results, the extreme load effects tended to increase with either the traffic volume or proportion of heavy vehicles. The evaluation vehicle loads for bridge safety assessment may be adjusted with the traffic conditions, such as the traffic volume, the proportion of heavy vehicles, and the consecutive vehicle traveling patterns.Keywords
This publication has 15 references indexed in Scilit:
- Application of influence lines for the ultimate capacity of beams under moving loadsEngineering Structures, 2015
- A review of probabilistic methods of assessment of load effects in bridgesStructural Safety, 2015
- A novel Bayesian extreme value distribution model of vehicle loads incorporating de-correlated tail fitting: Theory and application to the Nanjing 3rd Yangtze River BridgeEngineering Structures, 2014
- The use of micro-simulation for congested traffic load modeling of medium- and long-span bridgesStructure and Infrastructure Engineering, 2012
- Probabilistic models for mechanical properties of concrete, reinforcing steel and pre-stressing steelStructure and Infrastructure Engineering, 2012
- Characteristic dynamic traffic load effects in bridgesEngineering Structures, 2009
- Determination of bridge lifetime dynamic amplification factor using finite element analysis of critical loading scenariosEngineering Structures, 2008
- Simplified site-specific traffic load models for bridge assessmentStructure and Infrastructure Engineering, 2007
- Traffic load modelling and factors influencing the accuracy of predicted extremesCanadian Journal of Civil Engineering, 2005
- Reliability analysis of prestressed concrete bridge girders: comparison of Eurocode, Spanish Norma IAP and AASHTO LRFDStructural Safety, 2001