Comparison between 2D and 3D fiber-matrix debonding simulation for inverse identification of interface fracture properties
Open Access
- 30 June 2025
- journal article
- Published by Centre pour la Communication Scientifique Directe (CCSD) in Journal of Theoretical, Computational and Applied Mechanics
Abstract
Fiber-matrix debonding in single fiber specimen is studied experimentally and numerically based on the coupled criterion for which various 2D and one 3D configurations are used. Debonding initiation and propagation are mainly due to normal opening stresses in a 3D model whereas shear stresses play a minor role contrary to a 2D front model, i.e. in a plane normal to the fiber main axis. The 3D model enables describing the free surface singularity similarly to a 2D side model, i.e. along the fiber main axis. The latter cannot represent the debonding arrest and stable propagation after initiation. Overall, a 2D front model under plane strain assumption provides the best description of debonding initiation loading level compared to the 3D model, yet for a larger debonding opening. Experimental debonding openings are determined using DIC, providing the debonding initiation remote loading and corresponding opening. Tensile strengths and critical energy release rates respectively slightly higher and in the same order of magnitude are identified in 3D, based on the debonding opening, compared to a 2D front model.Keywords
All Related Versions
This publication has 44 references indexed in Scilit:
- Experimental characterization of in-plane debonding at fiber-matrix interface using single glass macro fiber samplesComposites Part A: Applied Science and Manufacturing, 2023
- Interpreting the single fiber fragmentation test with numerical simulationsComposites Part A: Applied Science and Manufacturing, 2019
- Single fiber pull-out test of regenerated cellulose fibers in polypropylene: An energetic evaluationComposites Part A: Applied Science and Manufacturing, 2018
- A numerical study of transverse cracking in cross-ply laminates by 3D finite fracture mechanicsComposites Part B: Engineering, 2016
- 3D in situ observations of glass fibre/matrix interfacial debondingComposites Part A: Applied Science and Manufacturing, 2013
- The role of matrix cracks and fibre/matrix debonding on the stress transfer between fibre and matrix in a single fibre fragmentation testComposites Part A: Applied Science and Manufacturing, 2012
- Evaluation of the transverse response of fiber-reinforced composites using a cross-shaped sample geometryScripta Metallurgica et Materialia, 1995
- A round-robin programme on interfacial test methodsComposites Science and Technology, 1993
- A microdebonding test for in situ assessment of fibre/matrix bond strength in composite materialsInternational Journal of Adhesion and Adhesives, 1980
- Glass‐resin joint strength and their effect on failure mechanisms in reinforced plasticsPolymer Engineering & Science, 1966