Shear force–based method and application for real-time monitoring of moving vehicle weights on bridges
Authors:
- 10 April 2014
- journal article
- research article
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
- Vol. 26 (5) , 505-516
Abstract
A new approach for monitoring the weight of trucks in motion using the bridge response is introduced in this article. The proposed technique is based on the use of strain rosettes for acquisition of shear strains near bridge supports. Bridge weigh-in-motion monitoring using shear force is a new approach that differs from the prevailing techniques based on the measurement of flexural strains. Formulations are introduced using the shear force response of the bridge in the computation of gross vehicle weights. The method requires truck speeds, influence lines, and shear force responses for the computation of gross vehicle weight. All these are acquired by two sets of rosette sensors attached in series on the webs of bridge girders. An experimental program was designed to evaluate the response of the proposed approach in real-time monitoring of moving truck weights. This was accomplished by instrumentation and load testing of a two-span prestressed concrete box girder bridge by a calibrated truck. Field test results are presented and compared with the actual weight of the calibrated truck.Keywords
This publication has 10 references indexed in Scilit:
- Damped fiber optic low-frequency tiltmeter for real-time monitoring of structural displacementsMeasurement Science and Technology, 2013
- Evaluation of effectiveness of vehicle weight estimations using bridge weigh-in-motionThe IES Journal Part A: Civil & Structural Engineering, 2010
- Determination of the coefficient of thermal expansion with embedded long-gauge fiber optic sensorsMeasurement Science and Technology, 2010
- Serially multiplexed FBG accelerometer for structural health monitoring of bridgesSmart Structures and Systems, 2009
- Experimental Testing of a Moving Force Identification Bridge Weigh-in-Motion AlgorithmExperimental Mechanics, 2008
- A general solution to the identification of moving vehicle forces on a bridgeInternational Journal for Numerical Methods in Engineering, 2008
- Practical Implementation of Optical Fiber Sensors in Civil Structural Health MonitoringJournal of Intelligent Material Systems and Structures, 2007
- Vehicle axle loads identification using finite element methodEngineering Structures, 2004
- Bridge weigh-in-motion system development using superposition of dynamic truck/static bridge interaction2004
- State-of-strain evaluation with fiber Bragg grating rosettes: application to discrimination between strain and temperature effects in fiber sensorsApplied Optics, 1997