Development and Life Cycle Analyses of Carbon Fiber Reinforced Polymer Tubular Parts for Metal Replacement in Aerospace Applications
Open Access
- 26 March 2025
- journal article
- research article
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (15) , 15324-15335
Abstract
Reducing the weight of aircraft components is a key strategy to improve fuel efficiency and reduce greenhouse gas emissions. Innovative materials such as carbon fiber reinforced polymers (CFRPs) and manufacturing techniques represent a possible solution for improved sustainability in the aerospace sector. In this context, this paper presents the design and the evaluation of the environmental and economic impacts of a CFRP tubular structural component, employed for supporting passenger seats of commercial aircraft, realized with the innovative FW process. At first, a simulation of the winding process was conducted to define the component layers, and then a FEM analysis was performed to identify the optimal layering of the tubular structure to support the defined loads. Subsequently, environmental and economic impacts were evaluated by means of life cycle assessment and life cycle costing methodologies. The comparison between the CFRP tubular structure and traditional aluminum alternative was conducted to identify the most sustainable solution. The analysis showed that the CFRP tubular component resulted in lower environmental impacts than the traditional alternative (i.e., about 70% lower considering the whole life cycle) mainly due to the reduced weight. However, the cost evaluation identified the CFRP alternative as the most expensive solution, with production cost 40% higher than the aluminum alternative.Keywords
Funding Information
- Università Politecnica delle Marche
This publication has 41 references indexed in Scilit:
- The effect of stacking sequence and circumferential ply drop locations on the mechanical response of type IV composite pressure vessels subjected to internal pressure: A numerical and experimental studyComposite Structures, 2022
- Influence of process parameters on resin content of filament-wound composite based on simulation of dual-phase resin flowComposite Structures, 2021
- Characterization of Composite Material Reinforced with Fique Fibra Through the Winding Filament Manufacturing Technique2020
- An experimental study into aging unidirectional carbon fiber epoxy composite under thermal cycling and moisture absorptionComposite Structures, 2019
- Fatigue behavior of filament wound E-glass/epoxy composite tubes damaged by low velocity impactComposites Part B: Engineering, 2014
- Lightweight design and crash analysis of composite frontal impact energy absorbing structuresComposite Structures, 2012
- Life cycle energy analysis of fiber-reinforced compositesComposites Part A: Applied Science and Manufacturing, 2009
- A self-healing carbon fibre reinforced polymer for aerospace applicationsComposites Part A: Applied Science and Manufacturing, 2007
- Fatigue behavior of surface cracked filament wound pipes with high tangential strength in corrosive environmentComposites Part A: Applied Science and Manufacturing, 2007
- Influence of winding speed and winding trajectory on tension in robotized filament winding of full section partsComposites Science and Technology, 2005