Large-format additive manufacturing of biodegradable reinforced TPS/PBAT composite blends
Open Access
- 17 April 2026
- journal article
- research article
- Published by Springer Nature in Progress in Additive Manufacturing
- p. 1-13
Abstract
The increasing demand for sustainable materials in additive manufacturing (AM) has prompted the development of biodegradable composite blends suitable for large-format fused granular fabrication (LF-FGF). In this study, novel thermoplastic formulations based on thermoplastic starch (TPS), poly(butylene adipate-co-terephthalate) (PBAT) and calcium carbonate (CaCO 3 ) were engineered and evaluated for printability, thermal stability, and mechanical performance. Two optimized formulations with different inorganic content (F1 and F2) were prepared via twin-screw extrusion using commercial masterbatches and characterized in terms of their starch, polymer, plasticizer, and filler contents. Spectroscopic and thermal analyses confirmed the structural integrity of all components post-extrusion. DSC and melt flow rate measurements revealed thermally stable processing windows (100–150 °C) and good flow behaviour suitable for LF-FGF. Both formulations were processed via injection moulding and LF-FGF, and mechanical testing was conducted on printed parts in two build orientations. F1 displayed superior toughness and dimensional fidelity, while F2 achieved the highest stiffness (E ≈ 300 MPa) due to higher CaCO 3 content. Notably, F1 printed in the XY direction outperformed its injection-moulded counterpart in tensile strength, highlighting the advantage of layer-wise thermal relaxation in LF-FGF. A prototype latticework to separate spaces measuring 100 × 50 cm was successfully fabricated as a proof-of-concept. These results demonstrate the potential of tailored biodegradable TPS/PBAT/CaCO 3 blends for scalable, sustainable manufacturing of large custom objects using pellet-based AM.Keywords
Funding Information
- Universidad de Cádiz
This publication has 32 references indexed in Scilit:
- Large Format Additive Manufacturing2025
- Poly (Butylene Adipate‐Co‐Terephthalate) (PBAT) – Based Biocomposites: A Comprehensive ReviewMacromolecular Materials and Engineering, 2024
- Reactive extrusion fabrication of thermoplastic starch with Ca2+ heterodentate coordination structure for harvesting multiple-reusable PBAT/TPS filmsCarbohydrate Polymers, 2024
- Large format additive manufacturing of polyethylene terephthalate (PET) by material extrusionAdditive Manufacturing, 2023
- In situ dual crosslinking strategy to improve the physico-chemical properties of thermoplastic starchCarbohydrate Polymers, 2021
- Fused filament fabrication of polymer materials: A review of interlayer bondAdditive Manufacturing, 2021
- Morphology and properties of thermoplastic starch blended with biodegradable polyester and filled with halloysite nanoclayCarbohydrate Polymers, 2020
- Infrared spectroscopy as a tool to characterise starch ordered structure—a joint FTIR–ATR, NMR, XRD and DSC studyCarbohydrate Polymers, 2016
- Thermoplastic Starch2014
- Formation of CaO from thermal decomposition of calcium carbonate in the presence of carboxylic acidsJournal of Thermal Analysis and Calorimetry, 2007