Lubrication analysis and sub-surface stress field of an automotive differential hypoid gear pair under dynamic loading
Open Access
- 6 October 2015
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 230 (7-8) , 1183-1197
Abstract
Film thickness and sub-surface stress distribution in a highly loaded automotive differential hypoid gear pair are examined. A 4-Degree of Freedom torsional gear dynamics model, taking into account the torsional stiffness of the pinion and the gear shafts, is used in order to evaluate the contact load, the surface velocities and the contact radii of curvature of the mating teeth during a full meshing cycle. The torsional gear dynamics model takes into account both the geometric non-linearities of the system (backlash non-linearity) as well as the time varying properties (contact radii, meshing stiffness) and the internal excitations caused by geometrical imperfections of the teeth pair (static transmission error). The input torque used for the study of the film thickness and the sub-surface stress distribution corresponds to the region after the main resonance, where no teeth separation occurs. The contact conditions predicted by the gear dynamics are used as the input for the elastohydrodynamic elliptical point contact analysis. The lubricant film thickness, the corresponding pressure and surface traction distributions are obtained quasi-statically using the output load of the dynamic gear pair model. The variation of the induced sub-surface stress field is determined throughout a meshing cycle. Based on the sub-surface reversing orthogonal shear stresses, marginal differences occur when the viscous shear on the conjunctional surfaces are taken into account, which are mainly influenced by the applied pressure distribution. The numerical prediction of lubricant film thickness agrees reasonably well with that predicted using the well-established extrapolated oil film thickness formulae reported in the literature.Keywords
This publication has 33 references indexed in Scilit:
- Transmission efficiency and noise, vibration and harshness refinement of differential hypoid gear pairsProceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics, 2013
- Elastohydrodynamic lubrication of hypoid gear pairs at high loadsProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2012
- Design and Manufacture of Spiral Bevel Gears With Reduced Transmission ErrorsJournal of Mechanical Design, 2009
- Dynamics of a hypoid gear pair considering the effects of time-varying mesh parameters and backlash nonlinearityJournal of Sound and Vibration, 2007
- Non-linear dynamics of a spur gear pairJournal of Sound and Vibration, 1990
- New Results of Traction Force Calculations in Elastohydrodynamic ContactsJournal of Tribology, 1985
- Methods of Synthesis and Analysis for Hypoid Gear-Drives of “Formate” and “Helixform”—Part 2. Machine Setting Calculations for the Pinions of Formate and Helixform GearsJournal of Mechanical Design, 1981
- Methods of Synthesis and Analysis for Hypoid Gear-Drives of “Formate” and “Helixform”—Part 1. Calculations For Machine Settings For Member Gear Manufacture of the Formate and Helixform Hypoid GearsJournal of Mechanical Design, 1981
- Methods of Synthesis and Analysis for Hypoid Gear-Drives of “Formate” and “Helixform”—Part 3. Analysis and Optimal Synthesis Methods For Mismatch Gearing and its Application For Hypoid Gears of “Formate” and “Helixform”Journal of Mechanical Design, 1981
- Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part IV—Starvation ResultsJournal of Lubrication Technology, 1977