A Deadbeat Predictive Current Harmonics Suppression Method for IPMSM Based on Quasi Proportional Resonant Control
- 9 July 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (11) , 14909-14922
Abstract
Deadbeat predictive current harmonics suppression method is gifted with fast dynamicity and simple mathematical model for the interior permanent magnet synchronous motors (IPMSM). However, when low-order current harmonics are suppressed and decreased, additional high-order current harmonics are produced and increased, and it deteriorates current harmonics suppression effect. In this article, a deadbeat predictive current harmonics suppression method based on quasi-proportional resonant (QPR) control is proposed to suppress the additional increased current harmonics. Through constructing the dynamic process model, the reasons why additional high-order current harmonics are produced are analyzed. Then, QPR control is applied for the voltage fluctuation problem, which leads to the production of additional high-order current harmonics. Whereby, the influence of additional high-order current harmonics can be reduced while the current harmonics suppression effect is improved. Furthermore, the current loop stability is analyzed through the Nyquist curves, and the current harmonics suppression effect is discussed based on the amplitude-frequency response. The effectiveness of the proposed method is verified on a 17.2-kW IPMSM drive experimental platform.Keywords
Funding Information
- National Key Research and Development Program of China (2022YFB4201600)
- China Postdoctoral Science Foundation Research Fund (2022M712931, 2023T160603)
- Key Research and Development Program of Zhejiang Province (2023C01243)
- State Key Laboratory of Fluid Power and Mechatronic Systems (SKLoFP_ZZ_2302)
This publication has 31 references indexed in Scilit:
- An Accurate Wide-Speed Range Control Method of IPMSM Considering Resistive Voltage Drop and Magnetic SaturationIEEE Transactions on Industrial Electronics, 2019
- Dual Three-Phase PMSM Torque Modeling and Maximum Torque per Peak Current Control Through Optimized Harmonic Current InjectionIEEE Transactions on Industrial Electronics, 2018
- Modulation Effect of Slotted Structure on Vibration Response in Electrical MachinesIEEE Transactions on Industrial Electronics, 2018
- Inverse Models and Harmonics Compensation for Suppressing Torque Ripples of Multiphase Permanent Magnet MotorIEEE Transactions on Industrial Electronics, 2018
- Current-Detection-Independent Dead-Time Compensation Method Based on Terminal Voltage A/D Conversion for PWM VSIIEEE Transactions on Industrial Electronics, 2017
- Suppression of Dead-Time Distortion Through Revised Repetitive Controller in PMSM DrivesIEEE Transactions on Energy Conversion, 2017
- Dead-Time Effect Compensation Based on Additional Phase Current MeasurementsIEEE Transactions on Industrial Electronics, 2015
- A Hybrid Filter for the Suppression of Common-Mode Voltage and Differential-Mode Harmonics in Three-Phase Inverters With CPPMIEEE Transactions on Industrial Electronics, 2014
- Present Status and Future Trends in Electric Vehicle Propulsion TechnologiesIEEE Journal of Emerging and Selected Topics in Power Electronics, 2013
- A Self-Learning Solution for Torque Ripple Reduction for Nonsinusoidal Permanent-Magnet Motor Drives Based on Artificial Neural NetworksIEEE Transactions on Industrial Electronics, 2013