The effect of aspect ratio on the leading-edge vortex over an insect-like flapping wing
Open Access
- 1 October 2015
- journal article
- Published by IOP Publishing in Bioinspiration & Biomimetics
- Vol. 10 (5) , 056020
Abstract
Insect wing shapes are diverse and a renowned source of inspiration for the new generation of autonomous flapping vehicles, yet the aerodynamic consequences of varying geometry is not well understood. One of the most defining and aerodynamically significant measures of wing shape is the aspect ratio, defined as the ratio of wing length (R) to mean wing chord (c). We investigated the impact of aspect ratio, AR, on the induced flow field around a flapping wing using a robotic device. Rigid rectangular wings ranging from AR = 1.5 to 7.5 were flapped with insect-like kinematics in air with a constant Reynolds number (Re) of 1400, and a dimensionless stroke amplitude of 6.5c (number of chords traversed by the wingtip). Pseudo-volumetric, ensemble-averaged, flow fields around the wings were captured using particle image velocimetry at 11 instances throughout simulated downstrokes. Results confirmed the presence of a high-lift, separated flow field with a leading-edge vortex (LEV), and revealed that the conical, primary LEV grows in size and strength with increasing AR. In each case, the LEV had an arch-shaped axis with its outboard end originating from a focus-sink singularity on the wing surface near the tip. LEV detachment was observed for AR > 1.5 around mid-stroke at ~70% span, and initiated sooner over higher aspect ratio wings. At AR > 3 the larger, stronger vortex persisted under the wing surface well into the next half-stroke leading to a reduction in lift. Circulatory lift attributable to the LEV increased with AR up to AR = 6. Higher aspect ratios generated proportionally less lift distally because of LEV breakdown, and also less lift closer to the wing root due to the previous LEV's continuing presence under the wing. In nature, insect wings go no higher than AR ~ 5, likely in part due to architectural and physiological constraints but also because of the reducing aerodynamic benefits of high AR wings.Keywords
This publication has 51 references indexed in Scilit:
- Span efficiency in hawkmothsJournal of The Royal Society Interface, 2013
- Reynolds number and aspect ratio effects on the leading-edge vortex for rotating insect wing planformsJournal of Fluid Mechanics, 2013
- Dual leading-edge vortices on flapping wingsJournal of Experimental Biology, 2006
- Insects in flight: direct visualization and flow measurementsBioinspiration & Biomimetics, 2006
- The effects of corrugation and wing planform on the aerodynamic force production of sweeping model insect wingsActa Mechanica Sinica, 2005
- Combined stereoscopic particle image velocimetry and line integral convolution methodsJournal of Visualization, 2005
- Stereoscopic digital particle image velocimetry for application in wind tunnel flowsMeasurement Science and Technology, 1997
- The three–dimensional leading–edge vortex of a ‘hovering’ model hawkmothPhilosophical Transactions of the Royal Society B: Biological Sciences, 1997
- A Description of Eddying Motions and Flow Patterns Using Critical-Point ConceptsAnnual Review of Fluid Mechanics, 1987
- The aerodynamics of hovering insect flight. II. Morphological parametersPhilosophical Transactions of the Royal Society of London. B, Biological Sciences, 1984