Effect of high‐temperature treatment on the mechanical and thermal properties of phenolic syntactic foams
- 27 February 2018
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 58 (12) , 2200-2209
Abstract
Phenolic syntactic foams were prepared with phenol–formaldehyde resin (PF), p‐toluene sulfonic acid, γ‐aminopropyltriethoxysilane (APTES), and glutaraldehyde (GA) cooperative treated hollow glass microsphere (HGM). Five types of syntactic foams were fabricated by filling different content of modified HGM. Compressive, flexural and thermal properties of the foams were investigated with respect to HGM content and treated temperature. Thermogravimetric analysis (TGA) studies presented a considerable reduction in the weight loss rate of system with the addition of HGM, the residual weight of syntactic foam with 50 vol% HGM at 800°C is 72.45%. Compression and bending tests results showed an increase on compressive and flexural properties for syntactic foams treated at high temperature with increasing HGM volume fraction. The thermal conductivity of all syntactic foams increased with temperature while decreased with introducing HGM, and thermal conduction through solid phase was the main heat transfer approach. The incorporation of HGM was beneficial to improving the thermal insulation property of syntactic foams especially at high temperatures. POLYM. ENG. SCI., 58:2200–2209, 2018. © 2018 Society of Plastics EngineersKeywords
This publication has 31 references indexed in Scilit:
- Ablative properties of carbon black and MWNT/phenolic composites: A comparative studyComposites Part A: Applied Science and Manufacturing, 2012
- Effect of nanoclay on the mechanical, dynamic mechanical and thermal properties of cyanate ester syntactic foamsMaterials Science and Engineering: A, 2010
- Nanoclay‐reinforced syntactic foams: Flexure and thermal behaviorPolymer Composites, 2010
- Preparation and characterization of resin-derived carbon foams reinforced by hollow ceramic microspheresMaterials Science and Engineering: A, 2010
- Comparison of tensile and compressive characteristics of vinyl ester/glass microballoon syntactic foamsComposites Part B: Engineering, 2010
- Processing and characterization of syntactic carbon foams containing hollow carbon microspheresCarbon, 2009
- Specific properties and fracture toughness of syntactic foam: Effect of foam microstructuresComposites Science and Technology, 2005
- Measurements of the thermal conductivity and thermal diffusivity of polymersPolymer Engineering & Science, 2003
- Analysis by pyrolysis/gas chromatography/mass spectrometry of glass fibre/vinylester thermal degradation productsPolymer Degradation and Stability, 1995
- On the dependence of the elasticity and strength of cancellous bone on apparent densityJournal of Biomechanics, 1988