Corrosion of 316L Stainless Steel used for Building Applications in Marine–Urban Atmospheres: A Case Study from Genoa, Italy
- 1 September 2022
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Architectural Engineering
- Vol. 28 (3) , 05022006
Abstract
This study concerns the corrosion behavior of a 316L stainless steel railing installed in an aggressive marine–urban atmosphere, located about 400 m as the crow flies from the sea, in Genoa, a coastal city in northwestern Italy. Despite the well-known relevance of surface finishes in determining the degree of resistance to atmospheric corrosion, the initial surface finish of the material used could not be ascertained. Only 3 months after it was erected, the railing showed, upon visual inspection, reddish-brown halos and spotted deposits distributed diffusely all over the structure. To investigate the likely causes of these sudden and unexpected corrosion phenomena, the morphology of the corrosion and the surface chemical compounds were examined using microscopic (optical and scanning electron, with an electron probe microanalyzer equipped with an energy-dispersive spectrometer) and profilometry (no-contact three-dimensional optical profiling) techniques. The morphology of the steel surface finish on the specific material used for the structure was found to be unsuitable for its designated use in such an aggressive atmosphere. Chloride occurring along the constituent grain boundaries of the rough surface finish triggered intergranular corrosion, leading to grain fall out and subsequent significant localized corrosion.Keywords
This publication has 24 references indexed in Scilit:
- Influence of Surface Treatments on the Pitting Corrosion of Type 304 Stainless Steel by Electrochemical Noise MeasurementsCorrosion, 2011
- Sensitization control in AISI 316L(N) austenitic stainless steel: Defining the role of the nature of grain boundaryCorrosion Science, 2009
- Characterization of particulate matter sources in an urban environmentScience of The Total Environment, 2008
- Harbours and air qualityAtmospheric Environment, 2007
- Aerosol advection and sea salt events in Genoa, Italy, during the second half of 2005Science of The Total Environment, 2007
- Elemental composition and source apportionment of particulate matter near a steel plant in Genoa (Italy)Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2006
- Importance of initial surface film in the degradation of stainless steels by atmospheric exposureCorrosion Science, 2003
- Passive films on stainless steels—chemistry, structure and growthElectrochimica Acta, 2003
- Release rates of chromium and nickel from 304 and 316 stainless steel during urban atmospheric exposure—a combined field and laboratory studyCorrosion Science, 2002
- Airborne contaminants and the pitting of stainless steels in the atmosphereCorrosion Science, 1982