Investigation of effect of abrasive water jet (AWJ) machining parameters on aramid fiber-reinforced polymer (AFRP) composite materials
Author:
- 4 June 2021
- journal article
- research article
- Published by Emerald Publishing in Aircraft Engineering and Aerospace Technology
- Vol. 93 (4) , 615-628
Abstract
Purpose: The purpose of this study was to optimize the surface roughness (Ra), delamination damage at the hole entrance (FdT) and at the hole exit (FdB) and kerf angle (K) in the drilling of aramid fiber-reinforced polymer (AFRP) composite material using abrasive water jet (AWJ) machining. Design/methodology/approach: The AFRP composite was produced by the vacuum infusion method. The drilling experiments were performed on an AWJ machine using a three-axis computerized numerical control system. Machine processing parameters were determined as water pressure (2,000, 3,000 and 4,000 bar), stand-off distance (2, 4 and 6 mm) and traverse feed rate (150, 250 and 350 mm/min). Optimization of processing parameters in the drilling experiments was carried out according to the Taguchi L27 (33) orthogonal array. In addition, gray relational analysis (GRA) was used to analyze the complex uncertainty affecting the results. Findings: Results of the drilling operations demonstrated that water pressure (P) was the most effective parameter, with 65.3%, 65.2%, 49.8% and 52.1% contribution rates for Ra, FdT, FdB and K, respectively. Practical implications: Reliable results have been obtained with Taguchi-based GRA while drilling AFRP composite material using AWJ. Significant results have been achieved to increase the hole quality in the drilling of AFRP composite material. Originality/value: The new approach is to present more detailed analysis by using Taguchi method and multi-decision Taguchi-based gray relation analysis in AFRP composite material drilling using AWJ. Thus, time and experiment costs are saved.Keywords
This publication has 14 references indexed in Scilit:
- Effects of processing parameters on kerf characteristics and surface integrity following abrasive waterjet slotting of Ti6Al4V/CFRP stacksJournal of Manufacturing Processes, 2019
- Predicting correlations in abrasive waterjet cutting parameters of Lanthanum phosphate/Yttria composite by response surface methodologyMeasurement, 2019
- A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materialsDefence Technology, 2018
- Prediction of surface roughness in abrasive waterjet trimming of fiber reinforced polymer compositesInternational Journal of Machine Tools and Manufacture, 2017
- Parametric Optimization of Abrasive Water Jet Machining of Inconel 800H Using Taguchi MethodologyUniversal Journal of Mechanical Engineering, 2014
- An investigation on kerf characteristics in abrasive waterjet cutting of layered compositesJournal of Materials Processing Technology, 2009
- Investigation of the abrasive water jet trajectory curvature inside the kerfJournal of Materials Processing Technology, 2009
- Effect of abrasive water jet machining parameters on aramid fibre reinforced plastics compositeInternational Journal of Material Forming, 2008
- Optimisation of surface finish in abrasive water jet cutting of Kevlar composites using hybrid Taguchi and response surface methodInternational Journal of Machining and Machinability of Materials, 2008
- Abrasive Waterjet Machining of Polymer Matrix Composites – Cutting Performance, Erosive Process and Predictive ModelsThe International Journal of Advanced Manufacturing Technology, 1999