Microstructure and mechanical properties in nano and microscale SiC-included dissimilar friction stir welding of AA6061-AA2024
- 1 March 2018
- journal article
- research article
- Published by SAGE Publications in Materials Science and Technology
- Vol. 34 (4) , 388-401
Abstract
This work investigates the effect of SiC particles on the microstructure and mechanical properties of dissimilar friction stir welding between AA6061-T6 and AA2024-T351. Two variations in the size of SiC particles, along the joint line, various groove width, and tool offset, were used for the welding. It was found that the joints made by rotational speed of 800 rev min−1, travelling speed of 31.5 mm min−1, groove width of 0.3 mm, and tool offset of 0.5 mm exhibited the most uniform distribution of particles for both micro- and nano-scale SiC particles. Additionally, the smaller and rounded equiaxed particles result in easier material flow, a more uniform metal matrix composite, the smallest grain size in the stir zone and the highest tensile strength.Keywords
This publication has 36 references indexed in Scilit:
- The effects of friction-stir process parameters on the fabrication of Ti/SiC nano-composite surface layerSurface and Coatings Technology, 2011
- The effect of SiC particles on the microstructure and mechanical properties of friction stir welded pure copper jointsMaterials Science and Engineering: A, 2011
- On the role of processing parameters in producing Cu/SiC metal matrix composites via friction stir processing: Investigating microstructure, microhardness, wear and tensile behaviorMaterials Characterization, 2011
- Effect of initial grain size on the joint properties of friction stir welded aluminumMaterials Science and Engineering: A, 2009
- Preliminary study on the microstructure and mechanical properties of dissimilar friction stir welds in aircraft aluminium alloys 2024-T351 and 6056-T4Journal of Materials Processing Technology, 2008
- Recrystallization mechanisms during friction stir welding/processing of aluminum alloysScripta Materialia, 2008
- Shear flow and formation of Nugget zone during friction stir welding of aluminium alloy 5083-OMaterials Science and Engineering: A, 2008
- CDRX modelling in friction stir welding of AA7075-T6 aluminum alloy: Analytical approachesJournal of Materials Processing Technology, 2007
- CDRX modelling in friction stir welding of aluminium alloysInternational Journal of Machine Tools and Manufacture, 2005
- Fine-grained alloys by thermomechanical processingCurrent Opinion in Solid State and Materials Science, 2001