Creep Failure of Reformer Tubes in a Petrochemical Plant
Open Access
Abstract
This paper investigates a failure in HP-Mod radiant tubes in a petrochemical plant. Tubes fail after 90,000 h of working at 950 °C. Observed failure is in the form of excessive bulging and longitudinal cracking in reformer tubes. Cracks are also largely branched. The microstructure of service-exposed tubes was evaluated using optical and scanning electron microscopes (SEM). Energy-dispersive X-ray spectroscopy (EDS) was used to analyze and characterize different phases in the microstructure. The results of this study showed that carbides are coarsened at both the inner and the outer surface due to the long exposure to a carburizing environment. Metallography examinations also revealed that there are many creep voids that are nucleated on carbide phases and scattered in between dendrites. Cracks appeared to form as a result of creep void coalescence. Failure is therefore attributed to creep due to a long exposure to a high temperature.Keywords
This publication has 16 references indexed in Scilit:
- Failure investigation on a radiant tube in an ethylene cracking unitEngineering Failure Analysis, 2019
- Creep embrittlement in aged HP-Mod alloy reformer tubesEngineering Failure Analysis, 2019
- Microstructure evolution and residual life assessment of service exposed Cr35Ni45 radiant tube alloyEngineering Failure Analysis, 2018
- Properties, structure and creep resistance of austenitic steel Super 304HMaterials Testing, 2015
- Effect of coking in massive failure of tubes in an ethylene cracking furnaceEngineering Failure Analysis, 2015
- Failure Analysis of Ethylene Cracking TubeJournal of Failure Analysis and Prevention, 2009
- Failure analysis and remaining life assessment of service exposed primary reformer heater tubesEngineering Failure Analysis, 2008
- Comparative study on sigma phase precipitation of three types of stainless steels: Austenitic, superferritic and duplexMaterials Science and Technology, 2006
- Creep failures of overheated boiler, superheater and reformer tubesEngineering Failure Analysis, 2004
- Mechanism of σ-phase precipitation in Cr–Ni austenitic steelsMaterials Science and Technology, 1988