Removal of reactive dye from aqueous solution using thermally treated red mud
- 21 May 2014
- journal article
- research article
- Published by Elsevier in Desalination and Water Treatment
- Vol. 55 (4) , 1040-1047
Abstract
The removal of color from wastewater is a major problem for textile industries. The best option to remove color is to combine conventional treatments with additional processes, such as adsorption. Industrial waste has been studied for use as adsorbents, specifically red mud (RM), which is an insoluble residue that is generated in large quantities during the processing of bauxite. In this study, a typical reactive dye, reactive blue 19 dye (RB 19), used in the textile industry was selected, and its ability to adsorb RM that was thermally treated at 500°C (RM 500°C) was evaluated. The adsorption of RB 19 was highest when the pH values were lower than the pHPCZ (7.0). The experimental adsorption capacity data were analyzed using the Langmuir and Freundlich models. The Langmuir model was more appropriate for describing this phenomenon in acidic conditions, with a maximum adsorption capacity of 178.4 mg g−1 (R2 of 0.84). Kinetics studies indicate that a pseudo-second-order reaction mechanism is responsible for the adsorption of RB 19, indicating that adsorption occurs through electrostatic interactions. Thus, these results indicate that the RM 500°C has potential applications for treating effluents from textile industries.Keywords
This publication has 27 references indexed in Scilit:
- A review on reactive adsorption for potential environmental applicationsAdsorption, 2012
- Dispersal and Attenuation of Trace Contaminants Downstream of the Ajka Bauxite Residue (Red Mud) Depository Failure, HungaryEnvironmental Science & Technology, 2011
- The Red Mud Accident in Ajka (Hungary): Characterization and Potential Health Effects of Fugitive DustEnvironmental Science & Technology, 2011
- After Red Mud Flood, Scientists Try to Halt Wave of Fear and RumorsScience, 2010
- Adsorption of dyes on carbon xerogels and templated carbons: influence of surface chemistryAdsorption, 2010
- Oxidative degradation of dyes in water using Co2+/H2O2 and Co2+/peroxymonosulfateJournal of Hazardous Materials, 2010
- Low-Cost Adsorbents: Growing Approach to Wastewater Treatment—a ReviewCritical Reviews in Environmental Science and Technology, 2009
- Reactive adsorption of methylene blue on montmorillonite via an ESI-MS studyApplied Clay Science, 2009
- Kinetics of adsorption of dyes from aqueous solution using activated carbon prepared from waste apricotJournal of Hazardous Materials, 2006
- Removal of dyes from aqueous solution using fly ash and red mudWater Research, 2005