Effect of laser scanning speed on TiN/TiB–Ti based composite
Authors:
- 1 March 2013
- journal article
- Published by SAGE Publications in Surface Engineering
- Vol. 29 (5) , 346-350
Abstract
In situ synthesised TiN and TiB particulate reinforced metal matrix composite coating was formed on Ti–3Al–2V alloy by laser cladding with a Ti/h-BN powder mixture. The phase structure, microstructure, microhardness and wear performance of the clad layer were analysed by optical microscope, X-ray diffraction, scanning electron microscopy, microhardness tester and wear testing machine. In situ TiN and TiB were synthesised in the forms of equiaxed crystal and needle platelet/whisker type microstructures in the clad layers. The scanning speed plays an important role on the microstructure of the TiN and TiB. The microhardness of laser clad layer was 850–1250 HV0·5, which was about five times of the substrate. The wear height loss of the substrate is almost two times of the clad layers.Keywords
This publication has 12 references indexed in Scilit:
- Effect of laser scanning speed on nitrided layers fabricated on titanium alloySurface Engineering, 2011
- Effect of yttrium on microstructure and mechanical properties of laser clad coatings reinforced by in situ synthesized TiB and TiCJournal of Rare Earths, 2011
- Microstructure and friction and wear behavior of laser boronizing composite coatings on titanium substrateApplied Surface Science, 2011
- A study on wear resistance and microcrack of the Ti3Al/TiAl + TiC ceramic layer deposited by laser cladding on Ti–6Al–4V alloyApplied Surface Science, 2010
- Laser clad Cr3C2–Ni composite coating on titanium alloysSurface Engineering, 2009
- Surface modification of Ti–6Al–4V alloy using laser-assisted deposition of a Ti–Si compoundSurface and Coatings Technology, 2008
- Prospects and future applications for diode lasers in surface engineeringSurface Engineering, 2007
- Technical note. Effects of Laser Hardening on Fretting Wear Behaviour of Ti AlloySurface Engineering, 2001
- Microstructure and formation mechanism of in situ synthesized TiC/Ti surface MMC on Ti-6Al-4V by laser claddingScripta Materialia, 2001
- Laser Surface Alloying of Titanium Substrates with Carbon and NitrogenSurface Engineering, 1985