Modeling and Characteristic Analysis of a Cylinder Block/Valve Plate Interface Oil Film Model for 35 MPa Aviation Piston Pumps
Open Access
Abstract
Oil film characteristics are critical to the high-reliability operation of high-pressure aviation piston pumps (APPs). However, there is still a lack of research on oil film modeling and characteristic analysis of high-pressure APPs. This paper takes the oil film at the cylinder block/valve plate interface of a 35 MPa high-pressure APP as the research object. By introducing a full oil film computational fluid dynamics (CFD) model considering non-isothermal and cavitation effects under multi-field coupling conditions, a cylinder block/valve plate interface oil film model is established, which includes a viscous wedge geometric model, multi-body dynamics model, and full oil film CFD model. The mesh independence test and force balance error analysis ensure the accuracy of the model calculation. Based on the established model, the oil film’s lubricating, sealing, load-bearing, and overturning characteristics are comprehensively and systematically analyzed, and the evolution law of different oil film characteristics with pressure changes is revealed. Moreover, suggestions for improving the structure and operating conditions of a 35 MPa high-pressure APP are proposed to optimize the oil film characteristics of the cylinder block/valve plate interface.Keywords
Funding Information
- National Natural Science Foundation of China (51890883, U2141209)
- Aviation Science Foundation of China Academy of Aeronautics (20182876003)
This publication has 36 references indexed in Scilit:
- Pressure, Flow, Force, and Torque Between the Barrel and Port Plate in an Axial Piston PumpJournal of Dynamic Systems, Measurement, and Control, 2008
- Computer Aided Optimization of Bearing and Sealing Gaps in Hydrostatic Machines—The Simulation Tool CasparInternational Journal of Fluid Power, 2002
- INVESTIGATION OF THE GAP FLOW IN DISPLACEMENT MACHINES CONSIDERING ELASTOHYDRODYNAMIC EFFECTProceedings of the JFPS International Symposium on Fluid Power, 2002
- Tipping the Cylinder Block of an Axial-Piston Swash-Plate Type Hydrostatic MachineJournal of Dynamic Systems, Measurement, and Control, 1997
- NUMERICAL METHOD FOR THE COMPUTATION OF FLOW IN IRREGULAR DOMAINS THAT EXHIBIT GEOMETRIC PERIODICITY USING NONSTAGGERED GRIDSNumerical Heat Transfer, Part B: Fundamentals, 1997
- Formation of a fluid film between a valve plate and a cylinder block of piston pumps and motors. 3rd report. Fluid film sluctuation and loss power.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B, 1989
- Formation of a Fluid Film between a Valve Plate and a Cylinder Block of Piston Pumps and Motors : 1st Report, A Valve Plate with Hydrodynamic PadsBulletin of JSME, 1986
- Performance of End-Face Seals with Diametral Tilt and Coning–Hydrodynamic EffectsA S L E Transactions, 1981
- Hydrodynamic Factors Affecting the Design of Valve Plates and Thrust BearingsProceedings of the Institution of Mechanical Engineers, 1966
- Fluid Film Lubrication of Parallel Thrust SurfacesProceedings of the Institution of Mechanical Engineers, 1946