Comparison between different infiltration models to describe the infiltration of permeable brick pavement system via a laboratory-scale experiment

Authors:
Open Access
Publisher website
Google Scholar
Abstract
The permeable brick pavement system (PBPs) is one of a widely used low impact development (LID) measures to alleviate runoff volume and pollution caused by urbanization. The performance of PBPs on decreasing runoff volume is decided by its permeability, and it was general described by hydraulic conductivity based on Darcy's law. But there is large error when using hydraulic conductivity to describe the infiltration of PBPs, and which infiltration process is not following Darcy's law, so it is important to find more accurate infiltration models to describe the infiltration of PBPs. The Horton, Philip, Green-Ampt, and Kostiakov infiltration models were selected to find an optimal model to investigate infiltration performance of PBPs via a laboratory-scale experiment, and the maximum absolute error (MAE), Bias, and coefficient of determination (R2) were selected to evaluate the models' errors via fitting with experiment data. The results showed that the fitting accuracy of Kostiakov, Philip, and Green-Ampt models was significantly affected by the monitoring area and hydraulic gradients. Meanwhile, Horton model fitted well (MAE = 0.25–0.32 cm/h, Bias = 0.07–0.11 cm/h, and R2 = 0.98–0.99) with the experiment data, and the parameters of the Horton model often can be achieved by monitoring, such as the maximum infiltration rate and the stable infiltration rate. Therefore, the Horton model is an optimal model to describe the infiltration performance of PBPs, which can also be adopted to evaluate hydrological characterization of PBPs.

This publication has 16 references indexed in Scilit: