Electrochemical Generation of Fenton's Reagent to Treat Spent Caustic Wastewater
- 30 June 2009
- journal article
- research article
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 44 (10) , 2223-2233
Abstract
This work shows the results of four Electro-Fenton laboratory tests to reduce the chemical oxygen demand in spent caustic solutions. The treatment consisted of i) a pH reduction followed by ii) an Electro-Fenton process, which was analyzed in this work. The efficiency of the Electro-Fenton process was analyzed as the COD reduction in pure phenol and sulphide solutions and real spent caustic samples. Close to 97% COD removal was achieved for sulphide treatment, and around 81% for phenol treatment. In the real spent caustic sample, 93% COD reduction was obtained. The sulphide content is lowered by both a pH reduction and the Electro-Fenton process, whereas the phenol concentration is not affected by the pH reduction – only by the Electro Fenton process.Keywords
This publication has 8 references indexed in Scilit:
- Technologies for the removal of phenol from fluid streams: A short review of recent developmentsJournal of Hazardous Materials, 2008
- Removal of propham from water by using electro-Fenton technology: Kinetics and mechanismChemosphere, 2008
- Decomposition of nitrotoluenes from trinitrotoluene manufacturing process by Electro-Fenton oxidationChemosphere, 2008
- Spent caustic oxidation using electro-generated Fenton's reagent in a batch reactorJournal of Environmental Science and Health, Part A, 2008
- Insight into spent caustic treatment: on wet oxidation of thiosulfate to sulfateJournal of Chemical Technology & Biotechnology, 1999
- Wet air oxidation of refinery spent causticEnvironmental Progress, 1998
- Performance update: Low pressure wet air oxidation unit at grangemouth, ScotlandEnvironmental Progress, 1997
- Fenton's reagent revisitedAccounts of Chemical Research, 1975