Corrosion behavior of Gd 2Zr 2O 7 thermal barrier coatings under Fe-containing environmental sediment attack
Authors:
Open Access
- 1 April 2024
- journal article
- research article
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 13 (4) , 447-462
Abstract
Environmental sediments mainly consisting of CaO-MgO-Al2O3-SiO2 (CMAS) corrosion is a series threat to thermal barrier coatings (TBCs), in which Fe element is usually ignored. Gd2Zr2O7 TBCs are famous for their excellent CMAS resistance. In this study, the characteristics of Fe-containing environmental sediments (CMAS-Fe) and their corrosiveness to Gd2Zr2O7 coatings were investigated. Four types of CMAS-Fe glass with different Fe contents were fabricated. Their melting points were measured to be 1322-1344 ℃, and the high-temperature viscosity showed a decreasing trend with increasing Fe contents. The corrosion behavior of four types of CMAS-Fe to Gd2Zr2O7 coatings at 1350 ℃ was investigated. At the initial corrosion stage (0.1 h), anorthite was precipitated in CMAS-Fe with a high Ca:Si ratio, while Fe-garnet was formed in the melt with the highest Fe content. Prolonging the corrosion time resulted in the formation of a reaction layer, which exhibited an interpenetrating network composed of Gd-oxyapatite, ZrO2, and residual CMAS-Fe. Some spinel was precipitated within the reaction layer. After 1 h or even longer time, the reaction layers tended to be stable and compact, which had comparable hardness and fracture toughness to those of Gd2Zr2O7 coatings. Under the cyclic CMAS-Fe attack, the residual CMAS-Fe in the interpenetrating network provided a pathway for the redeposited CMAS-Fe infiltration, resulting in the continuous growth of the reaction layer. As a result, Gd2Zr2O7 coatings had a large consumption in thickness, degrading the coating performance. Therefore, Gd2Zr2O7 coatings exhibit unsatisfactory corrosion resistance to CMAS-Fe attack.Keywords
This publication has 74 references indexed in Scilit:
- Long-term ceramic matrix composite for aeroengineJournal of Advanced Ceramics, 2022
- Composition optimization, high-temperature stability, and thermal cycling performance of Sc-doped Gd2Zr2O7 thermal barrier coatings: Theoretical and experimental studiesJournal of Advanced Ceramics, 2022
- Effects of surface roughness on CMAS corrosion behavior for thermal barrier coating applicationsJournal of Advanced Ceramics, 2021
- Investigation of CMAS Resistance of Sacrificial Suspension Sprayed Alumina Topcoats on EB-PVD 7YSZ LayersJournal of Thermal Spray Technology, 2019
- High-entropy pyrochlores with low thermal conductivity for thermal barrier coating materialsJournal of Advanced Ceramics, 2019
- Ceramic Top Coats of Plasma-Sprayed Thermal Barrier Coatings: Materials, Processes, and PropertiesJournal of Thermal Spray Technology, 2017
- Effect of the CaO/SiO2 mass ratio and FeO content on the viscosity of CaO–SiO2–“FeO”–12wt%ZnO–3wt%Al2O3 slagsInternational Journal of Minerals, Metallurgy and Materials, 2017
- Effect of Al2O3 on the Viscosity and Structure of CaO-SiO2-MgO-Al2O3-FetO SlagsMetallurgical and Materials Transactions B, 2015
- A Review of the Relationship between Viscosity and the Structure of Calcium‐Silicate‐Based Slags in IronmakingSteel Research International, 2012
- Technical and Economical Aspects of Current Thermal Barrier Coating Systems for Gas Turbine Engines by Thermal Spray and EBPVD: A ReviewJournal of Thermal Spray Technology, 2008