Cross-linked Smectites. IV. Preparation and Properties of Hydroxyaluminum-Pillared Ce- and La-Montmorillonites and Fluorinated NH 4 + -Montmorillonites
Authors:
- M. TokarzMTM. Tokarz
- J. ShabtaiJSJ. Shabtai
- 2 April 1985
- journal article
- Published by Cambridge University Press (CUP) in Clays and Clay Minerals
- Vol. 33 (2) , 89-98
Abstract
Reaction of hydroxy-Al oligocations with Ce 3+ - and La 3+ -exchanged montmorillonites, using 1.25, 1.60, or 2.0 mmole Al/g smectite, yielded partially pillared hydroxy-Al montmorillonite products containing a significant concentration of residual Ce 3+ or La 3+ . After heat treatment at 250°C these products showed high surface areas (∼340–500 m 2 /g) and high basal X-ray powder diffraction spacings (18.0–18.6 Å). Calcination at 400°–700°C resulted in lower surface areas of ∼200–450 m 2 /g and basal spacings of 16.3–18.3 Å, the values showing a gradual decrease with a decrease in the Al/smectite weight ratio and/or increase in the heat-treatment temperature. A major modification and improvement in the cross-linking procedure was achieved by fast aging (6–48 hr) of the hydroxy-Al oligomeric solution at 95°–100°C, instead of conventional aging for 2–3 weeks at 25°C. Fluorinated NH 4 + -montmorillonites, containing 0.4 to 2.1 wt. % F, were prepared by reaction of NH 4 + -montmorillonite at 60°C with 1.0 to 3.0 N aqueous solutions of NH 4 F. Interaction of the fluorinated montmorillonites with hydroxy-Al oligocations, using a ratio of 2.0 mmole Al/g smectite, yielded a series of cross-linked fluorinated montmorillonites with basal spacings of 17.9–18.0 Å and surface areas of 180–325 m 2 /g after heat treatment at 250°C. Calcination at 400°–500°C resulted in lower d(001) (16.6–17.7 Å) and surface-area values (140–300 m 2 /g). Increase in the fluorine content caused gradual decrease in both values. Transmission electron microscopy of pillared Ce-montmorillonite showed a highly oriented network of well-separated, parallel unit layers with an interlayer distance, Δd(001), of 9–10 Å. Calculated lateral (interpillar) distances were in good agreement with the pore-size distributions determined in independent adsorption studies.Keywords
This publication has 9 references indexed in Scilit:
- Cross-Linked Smectites. III. Synthesis and Properties of Hydroxy-Aluminum Hectorites and FluorhectoritesClays and Clay Minerals, 1984
- Intercalated Clay CatalystsScience, 1983
- Physicochemical Properties of Montmorillonite Interlayered with Cationic Oxyaluminum PillarsClays and Clay Minerals, 1983
- Formation, Compositions, and Properties of Hydroxy-Al- and Hydroxy-Mg-MontmorilloniteClays and Clay Minerals, 1980
- Studies of hydrolyzed aluminum chloride solutions. 1. Nature of aluminum species and composition of aqueous solutionsThe Journal of Physical Chemistry, 1980
- High Surface Area Solids Obtained by Reaction of Montmorillonite with Zirconyl ChlorideClays and Clay Minerals, 1979
- Cross-Linked Smectites. I. Synthesis and Properties of Hydroxy-Aluminum-MontmorilloniteClays and Clay Minerals, 1978
- Preparation and properties of some hydroxy-aluminium beidellitesClay Minerals, 1977
- A low-viscosity epoxy resin embedding medium for electron microscopyJournal of Ultrastructure Research, 1969