Mechanical, micro-, and macrostructural analysis of AA7075–T6 fabricated by friction stir butt welding with different rotational speeds and tool pin profiles
Authors:
- 2 September 2009
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 224 (3) , 419-433
Abstract
Friction stir welding (FSW) is a solid state welding process for joining aluminium alloys, has been employed in different industries, and is a new and promising welding process that can produce low-cost and high-quality joints of heat-treatable aluminium alloys because this process uses a non-consumable tool to generate frictional heat in the abutting surfaces and can eliminate some welding defects such as crack and porosity. The various parameters such as rotational speed, welding speed, axial force, and attack angle play vital roles in the FSW process in order to analyse the weld quality. In this research, the impact of processing parameters such as different rotational speed and tool pin profiles on the mechanical, micro-, and macrostructural properties during the FSW process involving the butt jointing of AA7075 T6 is investigated. It is important to note that four-flute and taper threaded pin profiles are utilized and the mechanical characteristics are determined by comparing the ultimate strength, percentage of elongation, and microhardness profiles for different rotational speeds and tool pin profiles.Keywords
This publication has 26 references indexed in Scilit:
- Effect of tool position on the fatigue properties of dissimilar 2024-7075 sheets joined by friction stir weldingJournal of Materials Processing Technology, 2008
- Influences of tool pin profile and welding speed on the formation of friction stir processing zone in AA2219 aluminium alloyJournal of Materials Processing Technology, 2008
- Relationship between base metal properties and friction stir welding process parametersMaterials Science and Engineering: A, 2008
- CDRX modelling in friction stir welding of AA7075-T6 aluminum alloy: Analytical approachesJournal of Materials Processing Technology, 2007
- Mechanical and microstructural behaviour of 2024–7075 aluminium alloy sheets joined by friction stir weldingInternational Journal of Machine Tools and Manufacture, 2006
- Friction stir welding characteristics of different heat-treated-state 2219 aluminum alloy platesMaterials Science and Engineering: A, 2006
- Tensile properties and fracture locations of friction-stir-welded joints of 2017-T351 aluminum alloyJournal of Materials Processing Technology, 2003
- Finite element modeling of friction stir welding—thermal and thermomechanical analysisInternational Journal of Machine Tools and Manufacture, 2003
- The improvement of mechanical properties of friction-stir-welded A356 Al alloyMaterials Science and Engineering: A, 2003
- Thermal modeling of friction stir welding in a moving coordinate system and its validationInternational Journal of Machine Tools and Manufacture, 2003