NEAR‐THRESHOLD FATIGUE CRACK GROWTH IN A12O3 PARTICLE REINFORCED 6061 ALUMINIUM ALLOY
Authors:
- 2 April 1995
- journal article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 18 (4) , 477-487
Abstract
Abstract— The influence of Al2O3 particle reinforcement on the fatigue crack growth properties of 6061‐T6 aluminium alloy in the near threshold regime has been investigated at a load ratio of R=– 1 using an alloy with 15 vol.% fine particles (6061/Al2O3/15p) and one with 21 vol.% coarser particles (6061/Al2O3/21p). The Al2O3 particles act as obstacles for fatigue crack growth and are especially effective at very low cyclic loads. For the reinforced alloy with fine particles the threshold of the stress intensity amplitude is higher than that for the alloy containing coarse particles, and the lowest threshold value of Kmax was obtained for pure 6061‐T6. Fracture of ceramic particles and interfaces between matrix and Al2O3 particles, both more frequent for coarser particles, may serve as an explanation for the more effective improvement of fatigue crack growth properties by fine particles. At maximum stress intensity factors above 6.5 MPa√m, fatigue crack growth in the particle reinforced alloys is faster than in the unreinforced alloy 6061‐T6, which is attributed to more frequent particle and interface fracturing.Keywords
This publication has 13 references indexed in Scilit:
- Fatigue properties of particle-reinforced metal-matrix compositesInternational Journal of Fatigue, 1993
- FEM modelling of stress intensity factors for fatigue crack growth at ultrasonic frequenciesEngineering Fracture Mechanics, 1993
- Elevated-temperature, low-cycle fatigue behaviour of an Al2O3p/6061-T6 aluminium matrix compositeComposites Science and Technology, 1993
- FATIGUE BEHAVIOUR OF Al2O3SHORT FIBRE REINFORCED ALUMINIUM ALLOYFatigue & Fracture of Engineering Materials & Structures, 1992
- Effects of the particle distribution on fatigue crack growth in particulate SiC/6061 aluminium alloy compositesInternational Journal of Fatigue, 1992
- FATIGUE CRACK GROWTH BEHAVIOUR IN MOLTEN‐METAL PROCESSED Sic PARTICLE‐REINFORCED ALUMINIUM ALLOYSFatigue & Fracture of Engineering Materials & Structures, 1992
- Damage initiation in metal matrix compositesActa Metallurgica et Materialia, 1991
- Fatigue crack propagation of Sic whisker reinforced 6061 aluminum alloy compositeEngineering Fracture Mechanics, 1991
- SHORT AND LONG FATIGUE CRACK GROWTH IN A SiC REINFORCED ALUMINIUM ALLOYFatigue & Fracture of Engineering Materials & Structures, 1990
- On the particle-size dependence of fatigue-crack propagation thresholds in SiC-particulate-reinforced aluminum-alloy composites: Role of crack closure and crack trappingActa Metallurgica, 1989