Seismic Overturning Fragility Analysis for Rigid Blocks Subjected to Floor Motions
Open Access
- 10 March 2023
- journal article
- research article
- Published by MDPI AG in Sustainability
- Vol. 15 (6) , 4945
Abstract
This paper investigates the seismic rocking-overturning fragility of freestanding rigid blocks subjected to one-sine acceleration pulses from a probabilistic perspective. An equivalent single-degree-of-freedom (SDOF) model with a bespoke discrete damper is used to simulate the responses of four blocks with varying geometries under excitation with various characteristics. The simulation results are used to perform an overturning fragility analysis and evaluate the performance of various intensity measures (IMs). An IM strip, referred to as a hybrid strip, can be observed in the analysis, within which both safe rocking and overturning occur. For IM values outside of the hybrid strip, there exists a clear distinction between these two states. In this study, we introduce the hybrid ratio, a parameter that can estimate the size of the hybrid strip of different IMs. The hybrid ratio is defined as the combination of two ratios of hybrid strip width and the two IM strip widths corresponding to safe rocking and overturning, respectively. The effect of the different analysis strip widths is also examined in the overturning fragility analysis. The results suggest that the IM determined by excitation magnitude, frequency, and block geometry parameters demonstrates its superiority compared with some well-known IMs by having the smallest hybrid ratio and coefficient of variation, as well as good robustness of the overturning fragility curves against the change of the analysis strip width.Keywords
This publication has 63 references indexed in Scilit:
- Vector-valued fragility functions for seismic risk evaluationBulletin of Earthquake Engineering, 2012
- Probabilistic Seismic Performance of Rocking‐Foundation and Hinging‐Column BridgesEarthquake Spectra, 2012
- Sliding and overturning potential of Christchurch 2011 earthquake recordsEarthquake Engineering & Structural Dynamics, 2012
- Seismic Fragility Evaluation of RC Frame Structures Retrofitted with Controlled Concrete Rocking Column and Damping TechniqueJournal of Earthquake Engineering, 2011
- Shake table tests on clutter levels of typical medicine shelves and contents subjected to earthquakesEarthquake Engineering & Structural Dynamics, 2011
- Experimental and analytical studies on the response of freestanding laboratory equipment to earthquake shakingEarthquake Engineering & Structural Dynamics, 2008
- On the dynamics of rocking motion of single rigid‐block structuresEarthquake Engineering & Structural Dynamics, 2007
- Characterizing frictional behavior for use in predicting the seismic response of unattached equipmentSoil Dynamics and Earthquake Engineering, 2005
- Shake table testing of bookcase – partition wall systemsCanadian Journal of Civil Engineering, 2004
- Sliding fragility of block‐type non‐structural components. Part 1: Unrestrained componentsEarthquake Engineering & Structural Dynamics, 2002