Single-Polarization, Optically Pre-Amplified Receiver With Gated, Burst-Mode Clock Recovery
Open Access
- 5 February 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 30 (6) , 533-536
Abstract
We report a receiver using a single-polarization optical low-noise pre-amplifier and a burst-mode, time-gated clock recovery unit (CRU). Timing jitter and bit-error-ratio (BER) measurements are presented for data rates from 72 Mb/s to 2.880 Gb/s, both with and without atmospheric fading. At the lowest burst-mode data rate of 72 Mb/s, temporal gating improves the recovered clock's timing jitter below receive power levels of -65 dBm, enabling comm-limited performance as opposed to CRU-limited performance. Gating extends the CRU and receiver range down to -88 dBm, a 3-dB sensitivity improvement over the non-gated case. For all data rates and channels measured, jitter values remain below 9 ps (3% of the clock period) with gating enabled. The BER performance is <;2.5 dB from the theoretical limit across all data rates, both with and without atmospheric fading.Keywords
Funding Information
- U.S. Air Force (FA8721-05-C-0002, FA8702-15-D-0001)
This publication has 5 references indexed in Scilit:
- Sensitive clock recovery for multi-rate DPSK optical receivers2015
- A process for free-space laser communications system design2009
- Phaselock Techniques2005
- Laser Beam Scintillation with Applications2001
- 2.5 and 10 Gb/s transmission experiments using a 137 photon/bit erbium-fiber preamplifier receiverIEEE Photonics Technology Letters, 1992