Optimal efficiency speed control of induction motors by variable rotor impedance
Authors:
- O.T. TanOTO.T. Tan
- 1 June 1989
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 4 (2) , 216-223
Abstract
An optimal method to control the speed of a wound-rotor induction motor by variable external rotor impedance is presented. The rotor impedance is adjusted so that, for any desired torque and slip values, the total copper losses are minimized. Motor efficiency is improved compared with the case of conventional speed control by variable rotor resistance only. An example illustrates the copper loss reduction and dynamic behavior of the drive. Simulation study results that show the percentage copper loss reduction is generally likely to be higher for lighter loads. For constant-torque loads, the reduction percentage reaches a peak at the lower slip values, whereas for fan-type loads the most significant percentage copper-loss reduction occurs at both the higher and lower slip values. The response time of the rotor speed for startup or a sudden change in the speed setting is considerably smaller than that achieved by pure rotor resistance control.Keywords
This publication has 14 references indexed in Scilit:
- Optimal Efficiency Control of an Induction Motor DriveIEEE Transactions on Energy Conversion, 1987
- Adjustable Speed Drive and Power Rectifier Harmonics-Their Effect on Power Systems ComponentsIEEE Transactions on Industry Applications, 1986
- Power Line Considerations for Variable Frequency DrivesIEEE Transactions on Industry Applications, 1985
- On-Line Efficiency Optimization of a Variable Frequency Induction Motor DriveIEEE Transactions on Industry Applications, 1985
- Power System Harmonics Effects from Adjustable-Speed DrivesIEEE Transactions on Industry Applications, 1984
- A Current-Source Inverter in the Secondary Circuit of a Wound Rotor Induction Motor Provides Sub- and Supersynchronous OperationIEEE Transactions on Industry Applications, 1981
- Switching Transients in Static Slip-Energy Recovery DriveIEEE Transactions on Power Apparatus and Systems, 1979
- The Through-Pass Inverter and Its Application to the Speed Control of Wound Rotor Induction MachinesIEEE Transactions on Power Apparatus and Systems, 1968
- Induction Motor Speed Control with Static Inverter in the RotorIEEE Transactions on Power Apparatus and Systems, 1966
- Rotor Impedance Control of the Wound-Rotor Induction MotorTransactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems, 1959