Optimization of Processing Parameters and Fiber Content of Cocoa Pod Husk Fiber-Reinforced Thermoplastic Polyurethane Composites by Taguchi Method
Authors:
- 6 June 2014
- journal article
- Published by Trans Tech Publications, Ltd. in Applied Mechanics and Materials
- Vol. 564, 394-399
Abstract
A composite of cocoa (Theobroma cacao) pod husk (CPH) fiber reinforced themoplastic polyurethane (TPU) was prepared by melt-blending method followed by compression moulding. Specimens were cut from the sheets that were prepared by compression moulding. The criteria of optimization was testing the specimens by tensile test and comparing the ultimate tensile strength. The aim of this study is to optimize processing parameters and fiber loading using Taguchi approach. These four parameters were investigated in three levels each. The L9 orthogonal array was used based on the number of parameters and levels that have been selected. Furthermore ANOVA was used to determine the significance of parameters. The processing parameters chosen for this study were temperature, speed and time of processing and fiber content. The results showed that optimum values were 190°C, 40 rpm, 11min and 30% for processing temperature, processing speed, processing time and fiber content; respectively. Using ANOVA; fiber content showed the highest significance value followed by processing time. Processing temperature and speed showed no significance in the optimization of TPU/CPH.Keywords
This publication has 17 references indexed in Scilit:
- Mechanical and thermal properties of sisal fiber-reinforced rubber seed oil-based polyurethane compositesMaterials & Design (1980-2015), 2010
- The effects of NCO/OH ratio on propylene oxide-modified oil palm empty fruit bunch-based polyurethane compositesJournal of Applied Polymer Science, 2008
- Palm‐based bio‐composites hybridized with kaoliniteJournal of Applied Polymer Science, 2007
- Polyurethane (PU)—oil palm empty fruit bunch (EFB) composites: the effect of EFBG reinforcement in mat form and isocyanate treatment on the mechanical propertiesPolymer Testing, 2004
- The mechanical and physical properties of polyurethane composites based on rice husk and polyethylene glycolPolymer Testing, 2003
- Fiber–matrix interactions in aramid‐short‐fiber‐reinforced thermoplastic polyurethane compositesJournal of Applied Polymer Science, 2002
- Natural-fibre-reinforced polyurethane microfoamsComposites Science and Technology, 2001
- Tensile properties of oil palm empty fruit bunch–polyurethane compositesEuropean Polymer Journal, 2001
- Short fiber reinforced thermoplastic polyurethane elastomer compositesPolymer Composites, 1998
- Composites of poly(vinyl chloride) and wood fibers. Part II: Effect of chemical treatmentPolymer Composites, 1990