Tribological Properties and Seasonal Freezing Damage Evolution of Rotating Spherical Hinge Self-Lubricating Coating
Open Access
- 20 August 2022
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 12 (16) , 8329
Abstract
The spherical hinge is an important part of rotating bridge construction, but over a long period of time, spherical hinge self-lubricating coating is easily eroded by water vapor. In this paper, the tribological properties and seasonal freezing damage evolution characteristics of a variety of rotating spherical hinge self-lubricating coating materials were studied by means of friction coefficient measurement experiments, friction and wear experiments and shear rheological experiments based on a self-developed indoor spherical hinge rotational friction coefficient tester. The results show that the self-developed indoor spherical hinge rotational friction coefficient tester can effectively and truly represent the working state and tribological properties of self-lubricating coating in practical engineering. A seasonal freezing environment has obvious influence on the tribological properties of spherical hinge self-lubricating coating, which is an irreversible process of deterioration. With the increase in the freezing–thawing cycle, the friction coefficient and viscosity of self-lubricating coating materials increase gradually, and the thixotropy and elastic recovery become worse and worse. When the content of graphene is 0.1%, the performance is the best. At room temperature and in a freeze–thaw environment, the friction coefficient of graphene grease is lower than that of PTFE 0.007 and 0.008, respectively. The diameter of the grinding plate is less than 0.075 mm and 0.001 mm, respectively. The maximum bite load without card is higher than 8.1% and 11.5%. The area of the thixotropic ring is lower than 41% and 42%. Phase transition points were higher than 42% and 64%. The apparent viscosity was higher than 6.6% and 74%. Graphene greases show the greatest bearing capacity, thixotropy and structural strength in conventional and seasonal freezing conditions and exhibit excellent tribological properties.Keywords
Funding Information
- National Natural Science Foundation of China (51178204, 20190303033SF)
- Science and Technology Development Program of Jilin Province (51178204, 20190303033SF)
This publication has 39 references indexed in Scilit:
- Fine-Analysis for the Concrete Upper Rotation Table and Pier of a Bridge Using Rotation Construction MethodApplied Mechanics and Materials, 2014
- Stability Impact Analysis of Random Dead Load Distribution to T-Rigid Frame Bridge Swivel ConstructionApplied Mechanics and Materials, 2013
- High Temperature Tribological Properties of Modified Nano-diamond Additive in Lubricating OilPhysics Procedia, 2013
- Monitoring of Long-Span Self-Anchored Arch Bridge Constructed with Rotation MethodApplied Mechanics and Materials, 2012
- Research on the Application of Horizontal Rotation Construction Method with Flat Hinge in Cable-Stayed Bridge ConstructionAdvanced Materials Research, 2011
- Moment resistance and rotation capacity of semi-rigid composite connections with precast hollowcore slabsJournal of Constructional Steel Research, 2010
- Influence of grease composition on rolling contact wear: Experimental studyTribology International, 2009
- Effect of rheological behaviour of lithium greases on the friction processIndustrial Lubrication and Tribology, 2008
- Constructability Analysis of the Bridge Superstructure Rotation Construction Method in ChinaJournal of Construction Engineering and Management, 2006
- Effects of Grease Composition and Structure on Film Thickness in Rolling ContactTribology Transactions, 2003