Lead ferrite-activated carbon magnetic composite for efficient removal of phenol from aqueous solutions: synthesis, characterization, and adsorption studies
Open Access
- 23 June 2022
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-16
Abstract
A novel lead ferrite-magnetic activated carbon (lead ferrite-MAC) composite was developed using the chemical co-precipitation method. Instrumental analyses such as X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and Brunauer–Emmett–Teller (BET) analysis were performed to characterize adsorbent. The uptake of phenol from aqueous solutions using the developed adsorbent was compared to that of pristine activated carbon. The maximum adsorption capacity of lead ferrite-MAC composite (145.708 mg/g) was more than that of pristine activated carbon (116.606 mg/g) due to the metal hydroxides coated on activated carbon since they improve the retention of phenol on the available active sites of adsorbent and create an additional electrostatic interaction with the phenol adsorbate. Regarding the high value of the coefficient of determination (R2) and adjusted determination coefficient (R2adj), coupled with the lower values of average relative error (ARE) and minimum squared error (MSE), it can be found that the isothermal data for the lead ferrite-MAC adsorbent were in agreement with the isotherm models of Redlich-Peterson and Langmuir. From the kinetic viewpoint, pseudo-second-order and linear driving force models explained the phenol adsorption data for both adsorbents. The reusability tests for lead ferrite-MAC composite revealed that after six cycles, 85% of the initial adsorption capacity was maintained. The developed adsorbent can be successfully applied to uptake phenol from aqueous solutions.Keywords
This publication has 71 references indexed in Scilit:
- Role of pore volume and surface diffusion in the adsorption of aromatic compounds on activated carbonAdsorption, 2013
- Development of magnetic activated carbon from almond shells for trinitrophenol removal from waterChemical Engineering Journal, 2011
- Adsorption of phenol and its derivatives from water using synthetic resins and low-cost natural adsorbents: A reviewJournal of Environmental Management, 2009
- Batch adsorption of phenol onto physiochemical-activated coconut shellJournal of Hazardous Materials, 2009
- Synthesis and properties of magnetic Fe3O4-activated carbon nanocomposite particles for dye removalMaterials Letters, 2008
- Preparation and evaluation of a novel Fe–Mn binary oxide adsorbent for effective arsenite removalWater Research, 2007
- Synthesis and magnetic properties of cobalt ferrite (CoFe2O4) nanoparticles prepared by wet chemical routeJournal of Magnetism and Magnetic Materials, 2007
- Adsorption of phenolic compounds by activated carbon—a critical reviewChemosphere, 2005
- Treatment of phenol-containing aqueous solutions by membrane-based solvent extraction in coupled ultrafiltration modulesChemical Engineering Journal, 2004
- Biosorption of phenol by immobilized activated sludge in a continuous packed bed: prediction of breakthrough curvesProcess Biochemistry, 2004