Parasitics-Assisted Soft-Switching and Secondary Modulated Snubberless Clamping Current-Fed Bidirectional Voltage Doubler for Fuel Cell Vehicles
- 29 February 2016
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Vehicular Technology
- Vol. 66 (2) , 1053-1062
Abstract
A current-fed full-bridge bidirectional voltage doubler with secondary-assisted device voltage clamping and zero-current commutation (ZCC) is proposed for fuel cell vehicles (FCVs). The proposed topology is suitable for interfacing energy storage and/or fuel cell stack with a dc bus in FCVs. A voltage doubler on the secondary side is selected to enhance the gain by 2×, reduce transformer size, and efficiently reduce the low-frequency dc current harmonics. Parasitics-based zero-voltage switching (ZVS), secondary-based zero-current switching of low-voltage-side devices, and ZVS of secondary devices are achieved. The proposed secondary modulation technique naturally clamps the voltage across the primary-side devices with ZCC, thus eliminating the necessity for traditional active-clamp or passive snubbers. Switching losses are reduced, owing to the soft-switching of all semiconductor devices. Steady-state analysis and design are studied and explained. The experimental results of a 1-kW proof-of-concept hardware prototype are shown to demonstrate the performance and confirm the proposed claims.Keywords
Funding Information
- Singapore Ministry of Education Tier 1
- University of Technology of Belfort-Montbeliard, Belfort, France.
This publication has 27 references indexed in Scilit:
- A short review of aging mechanism modeling of proton exchange membrane fuel cell in transportation applications2014
- Impulse Commutated Zero-Current Switching Current-Fed Push–Pull Converter: Analysis, Design, and Experimental ResultsIEEE Transactions on Industrial Electronics, 2014
- Novel Bidirectional Snubberless Naturally Commutated Soft-Switching Current-Fed Full-Bridge Isolated DC/DC Converter for Fuel Cell VehiclesIEEE Transactions on Industrial Electronics, 2013
- Battery, Ultracapacitor, Fuel Cell, and Hybrid Energy Storage Systems for Electric, Hybrid Electric, Fuel Cell, and Plug-In Hybrid Electric Vehicles: State of the ArtIEEE Transactions on Vehicular Technology, 2010
- Analysis and design of a current-fed zero-voltage-switching and zero-current-switching CL-resonant push–pull dc–dc converterIET Power Electronics, 2009
- Current-fed full-bridge boost converter with zero current switching for high voltage applications2005
- Topological Overview of Hybrid Electric and Fuel Cell Vehicular Power System Architectures and ConfigurationsIEEE Transactions on Vehicular Technology, 2005
- Low input current ripple converters for fuel cell power units2005
- Power conversion and control strategies for fuel cell vehicles2004
- Fuel cell vehicles: opportunities and challenges2004