Homogeneous Distribution of Sintering Additives in Liquid‐Phase Sintered Silicon Carbide

Authors:
  • ELEva Lidén
    Eva Lidén
  • ECElis Carlstrom
    Elis Carlstrom
  • LELars Eklund
    Lars Eklund
  • BNBrita Nyberg
    Brita Nyberg
  • RCRoger Carlsson
    Roger Carlsson

Abstract
The addition of sintering additives to silicon carbide particles by electrostatic adsorption of colloidal A12O3 and Y2O3 sols has been studied as a way to achieve an optimum homogeneity in the microstructure. The adsorption behavior of the sol particles was examined by electrophoretic measurements and X‐ray fluorescence analysis. Both A12O3 and Y2O3 sols could simultaneously be adsorbed on the SiC particle surfaces. Viscosity measurements showed that the colloidal sol particles had a stabilizing effect on the slip, and hence slips with relatively high solid loadings could be prepared without adding extra dispersing agent. Liquid‐phase‐sintered silicon carbide materials (LPS‐SiC) with 2 wt% A12O3 and 1 wt% Y2O3 were prepared by freeze granulation/ pressing and sintering at 1880deg;C for 4 h. The homogeneity of the green compacts was quantified using a spot analysis technique in an electron probe microanalyzer. It was clearly shown that the addition of sols gave a more homogeneous microstructure than the reference sample with Y2O3 and A12O3 added as powders. The addition of sintering additives as sols also enhanced the sintering behavior.

This publication has 13 references indexed in Scilit: