Functional Architecture and Exploratory Operational Assessment of a Mobile Hydraulic Clay-Brick Molding Machine for Small-Scale Manufacturing

Authors:
Open Access
Publisher website
Google Scholar
Abstract
Small-scale clay-brick yards require molding equipment that increases output while remaining mobile, locally serviceable, and compatible with intermittent material supply. This article documents the functional architecture and exploratory operational performance of the mobile 12-cavity hydraulic clay-brick molding machine (ML12). Its design contribution is the integration of a dimensioned wheeled steel chassis, seated paired-lever controls, a translating feed hopper/distributor, a 12-cavity mold, two vertical hydraulic actuators, and a water-spray cleaning subsystem in a four-stage operating cycle. A retrospective concept-appraisal matrix compares this architecture with fixed automated and mobile manual concepts; equal weighting and one-at-a-time ±25% weight variations preserve the ML12’s highest internal score, without establishing stakeholder preference or empirical superiority. The evidence base also comprises sequential daily production logs: ten days of traditional manual molding followed by ten days of ML12-assisted molding. Mean gross green-brick output was 720 ± 86 bricks/day in the traditional period and 1495 ± 16 bricks/day in the ML12 period; corresponding descriptive throughputs were 86.5 and 186.9 bricks/h. A rejection-rate sensitivity analysis shows that, if traditional production had no rejects, ML12 conforming output would equal the traditional gross mean at a 51.8% ML12 rejection rate; this quantity boundary is not an estimate of quality or economic break-even. A preliminary linear-static finite-element case for a reconstructed frame returned a maximum von Mises stress of 112.3 MPa, 1.82 mm resultant displacement, and a minimum elastic safety factor of 2.23 on the reported medium mesh; the result is limited to the specified 1.0 kN load case and is not structural certification of the complete machine. Because the operational comparison was non-randomized and did not control staffing, operators, clay batch, moisture, weather, energy use, or rejection rate, the observed difference cannot be attributed exclusively to the machine. The results establish the machine architecture, an operational signal, and a bounded preliminary frame response, but not brick quality, ergonomic benefit, full structural safety, environmental benefit, or commercial return.

This publication has 20 references indexed in Scilit: