Feasibility of n-Dodecane Fuel for Solid Oxide Fuel Cell with Ni-ScSZ Anode

Authors:
Publisher website
Google Scholar
Abstract
Direct feeding of n-dodecane (C12H26),(C12H26), a model liquid fuel of kerosene, was carried out using a cell consisting of ScSZ electrolyte with Ni-ScSZ cermet anode and Ni mesh current collector. The influence of steam to carbon ratio (S/C) and fuel utilization on the cell performance was examined. At S/C=1.0­2.0S/C=1.0­2.0 and low fuel concentration (2 (∼45% fuel utilization) with an anode potential of about −0.77 V. There was no degradation of the anode and current collector. At S/C=0.5,S/C=0.5, a stable operation was also achieved, but the current collector was partially disintegrated. The thermal decomposition of n-dodecane into mainly C2H4C2H4 and H2H2 occurred without serous carbon deposition and subsequent steam reforming reactions of C2H4C2H4 with water vapor produced hydrogen within the Ni-ScSZ anode and onto the Ni current collector. Increasing fuel utilization from 44 to 66% resulted in promoting the H2H2 oxidation and the shift reaction of CO. A small amount of methane and C2C2 compounds remained and, as a result, the partial pressure of hydrogen was lower than the calculated equilibrium composition. The observed lower open-circuit voltage is due to the incomplete equilibration for internal reforming reaction of n-dodecane. © 2005 The Electrochemical Society. All rights reserved.

This publication has 15 references indexed in Scilit: