Factors affecting fine bubble creation and bubble size for activated sludge
- 31 March 2014
- journal article
- Published by Wiley in Water and Environment Journal
- Vol. 29 (1) , 105-113
Abstract
This paper addresses a study of air bubble creation in wastewater treatment system using both computational fluid dynamic (CFD) and experimental techniques. Based on the results found in this work, it was found that the bubble size depends on several factors such as flow rate, inlet pressure and contact angle for rubber membrane. Among these factors, it was found that the flow rate has the largest effect on the bubble size followed by membrane material contact angle. The punch size has a moderate effect on the bubble size while the punch length and punch direction have slight effect on bubble size. Finer bubbles are desired and they provide larger surface area and longer residency time which will improve the standard oxygen transfer.Keywords
Funding Information
- ITT
- UWM Research Foundation
This publication has 8 references indexed in Scilit:
- Bubble Deflector to Enhance Fine Bubble Aeration for Wastewater Treatment in Space Usage2012
- Experimental study of mass transfer in a dense bubble swarmChemical Engineering Science, 2011
- Factor Affecting Bubble Creation and Bubble Size2011
- Oxygen transfer during aerobic biodegradation of pollutants in a dense activated sludge slurry bubble column: Actual volumetric oxygen transfer coefficient and oxygen uptake rate in p-nitrophenol degradation by acclimated waste activated sludgeBiochemical Engineering Journal, 2010
- A second order coupled level set and volume-of-fluid method for computing growth and collapse of vapor bubblesJournal of Computational Physics, 2003
- Influence of wetting conditions on bubble formation at orifice in an inviscid liquid. Transformation of bubble shape and sizeColloids and Surfaces A: Physicochemical and Engineering Aspects, 2003
- Cavitation bubble dynamicsUltrasonics Sonochemistry, 1997
- Control of activated sludge filamentous bulking—I. Effect of the hydraulic regime or degree of mixing in an aeration tankWater Research, 1973