Acoustic Properties of a Metal Close to Its Melting Point, as Measured by Laser Ultrasonics

Authors:

Abstract
This study investigates the acoustic properties of a metal near its phase-change temperature using laser ultrasonics. A Pb-free solder sample was prepared, and its temperature was increased stepwise from 40°C to 210°C with concurrent measurement of laser ultrasonic waves on the solder surface. Noticeable change in the waveforms was observed at 203°C and 209°C. These sudden changes occurred with a 1°C change in temperature. The change at 203°C was attributed to an acoustic mode transformation from Rayleigh-like to Lamb-like as we also found that part of the solid solder became thin as a result of partial melting from the bottom and rim. Only the sound through the air was detected at temperature of 209°C and higher, where this sound was due to ablations. This phenomenon was responsible for local melting at the laser irradiation point, generating the ultrasonic waves.

This publication has 18 references indexed in Scilit: