A Health Monitoring Method for Bond Wires in IGBT Modules Based on Voltage Ringing Characteristics
- 9 August 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 66 (9) , 3953-3960
Abstract
Bond wire failure is a common failure that seriously affects the reliability of insulated-gate bipolar transistor (IGBT) modules. Real-time health monitoring for bond wires is very important to avoid catastrophic failures. In this article, we introduce a new health monitoring method for bond wires in IGBT modules based on the voltage ringing characteristics. We applied a double pulse circuit to generate voltage ringing in IGBTs and freewheeling diodes (FWDs) during turn off and reverse recovery phases. To monitor bond wire failure, we theoretically and experimentally validated the overshoot and oscillation frequency as indicators. In particular, we investigated the effects of the junction temperature and operating conditions on the overshoot and proposed their influence functions. We designed a measurement circuit to identify small changes in the overshoot. Finally, the health baselines for the overshoot under different conditions were experimentally verified. The novelty of the research lies in the accurate online monitoring for bond wire failure in IGBT modules without any external injection; the measurement circuit adopts the interrupt mode to save the controller resources. Our experimental results showed that after half the bond wire of the IGBT and the FWD failed, their voltage overshoot increased by nearly 5%.Keywords
Funding Information
- ‘New Energy Vehicle’ Key Special Project of the National Key Research and Development Plan ((2017YFB0102500))
This publication has 18 references indexed in Scilit:
- Evaluation of Vce at Inflection Point for Monitoring Bond Wire Degradation in Discrete Packaged IGBTsIEEE Transactions on Power Electronics, 2016
- Condition Monitoring IGBT Module Bond Wires Fatigue Using Short-Circuit Current IdentificationIEEE Transactions on Power Electronics, 2016
- Monitoring Transistor Degradation in Power Inverters Through Pole ShiftsIEEE Transactions on Electromagnetic Compatibility, 2015
- State Detection of Bond Wires in IGBT Modules Using Eddy Current Pulsed ThermographyIEEE Transactions on Power Electronics, 2013
- Evaluation of $V_{\rm ce}$ Monitoring as a Real-Time Method to Estimate Aging of Bond Wire-IGBT Modules Stressed by Power CyclingIEEE Transactions on Industrial Electronics, 2012
- Ageing and Failure Modes of IGBT Modules in High-Temperature Power CyclingIEEE Transactions on Industrial Electronics, 2011
- Condition Monitoring for Device Reliability in Power Electronic Converters: A ReviewIEEE Transactions on Power Electronics, 2010
- Lifetime prediction of IGBT modules for traction applications2002
- Selected failure mechanisms of modern power modulesMicroelectronics Reliability, 2002
- Fast power cycling test of IGBT modules in traction application1997