Effects of argon gas flow rate on laser-welding
Authors:
Open Access
- 1 January 2012
- journal article
- Published by Japanese Society for Dental Materials and Devices in Dental Materials Journal
- Vol. 31 (2) , 316-326
Abstract
The purpose of this study was to evaluate the effects of the rate of argon gas flow on joint strength in the laser-welding of cast metal plates and to measure the porosity. Two cast plates (Ti and Co-Cr alloy) of the same metal were abutted and welded together. The rates of argon gas flow were 0, 5 and 10 L/min for the Co-Cr alloy, and 5 and 10 L/min for the Ti. There was a significant difference in the ratio of porosity according to the rate of argon gas flow in the welded area. Argon shielding had no significant effect on the tensile strength of Co-Cr alloy. The 5 L/min specimens showed greater tensile strength than the 10 L/min specimens for Ti. Laser welding of the Co-Cr alloy was influenced very little by argon shielding. When the rate of argon gas flow was high, joint strength decreased for Ti.Keywords
This publication has 19 references indexed in Scilit:
- Mechanical properties of laser-welded cast titanium joints under different conditionsThe Journal of Prosthetic Dentistry, 1998
- Laser welding of a cobalt-chromium removable partial denture alloyThe Journal of Prosthetic Dentistry, 1998
- Thermal modeling of laser welding for titanium dental restorationsThe Journal of Prosthetic Dentistry, 1998
- Joining titanium materials with tungsten inert gas welding, laser welding, and infrared brazingThe Journal of Prosthetic Dentistry, 1995
- Titanium framework removable partial denture used for patient allergic to other metals: A clinical report and literature reviewThe Journal of Prosthetic Dentistry, 1995
- Mechanical properties of laser welds of titanium in dentistry by pulsed Nd:YAG laser apparatusThe Journal of Prosthetic Dentistry, 1993
- Elastic moduli and tensile and physical properties of heat-treated and quenched powder metallurgical Ti-6Al-4V alloyMetallurgical Transactions A, 1991
- Thermodynamic aspects of TiAl and TiSi2 oxidation: The Al-Ti-O and Si-Ti-O Phase diagramsOxidation of Metals, 1991
- Young's modulus and damping of Ti6Al4V alloy as a function of heat treatment and oxygen concentrationMaterials Science and Engineering: A, 1990
- Effects of oxygen and heat treatment on the mechanical properties of alpha and beta titanium alloysMetallurgical Transactions A, 1988