Pt/CexZr1‑xO2 Bi‑Functional Catalyst for GasRecombination and Radical Scavenging in PEMWater Electrolysis Cells
Authors:
- Zheyu ZhangZZZheyu Zhang
- Frank PilgerFPFrank Pilger
- Ivo AlxneitIAIvo Alxneit
- Agnese CarinoACAgnese Carino
- Mohamed TarikMTMohamed Tarik
- Elisabeth MüllerEMElisabeth Müller
- Antonio CervellinoACAntonio Cervellino
- Andreas MühlmannAMAndreas Mühlmann
- Christian LudwigCLChristian Ludwig
- Lorenz GublerLGLorenz Gubler
- Andrea TestinoATAndrea Testino
Preprint
- 18 December 2024
- preprint
- Published by American Chemical Society (ACS) in ChemRxiv
Abstract
Incorporating platinum (Pt) as a gas recombination catalyst in proton exchange membranes (PEMs) effectively addresses the challenge of pronounced hydrogen crossover in PEM water electrolysis cells, particularly when thin membranes are employed. However, the Pt-catalyzed formation of reactive oxygen species, including hydroxyl radicals (HO•), can accelerate membrane degradation, requiring the use of a radical scavenger such as cerium-zirconium oxide. Given the short diffusion length of HO• in the PEM, it is necessary to position the cerium-zirconium oxide close to the Pt sites where radicals are catalytically produced, for timely scavenging. To address this issue, we propose the use of a bi-functional catalyst Pt/CexZr1‑xO2, where Pt particles are anchored on the CexZr1‑xO2 support. Adapting a one-pot polyol method, Pt/CexZr1‑xO2 catalysts were synthesized with Ce contents of x = 0.25, 0.5, 0.75 and 1, and two Pt-to-oxide loadings of 0.5 and 5 wt %. The catalysts were then calcined at either 500 °C or 900 °C, and the resulting phases were characterized by high resolution X-ray diffraction with Rietveld refinement, nitrogen physisorption and transmission electron microscopy. It was observed that the cubic fluorite structure of ceria tends to be maintained with a higher Ce content, a lower Pt-to-oxide loading and a lower calcination temperature. Otherwise, the formation of tetragonal phase is favored. Pt was found to be mainly dispersed ionically when calcined at 500 °C, and to largely segregate into particles at 900 °C. Two selected compositions, namely 0.5‑Pt/Ce0.5Zr0.5O2 and 5‑Pt/Ce0.5Zr0.5O2, were incorporated into the membrane for PEM water electrolysis cell measurements. A reduced content of H2 in O2 in the anode product gas and a lower fluoride release rate were observed using the composite membrane containing 5‑Pt/Ce0.5Zr0.5O2, compared to the blank measurement. The results confirm the bi-functionality of this synthesized catalyst, demonstrating its novel application for gas recombination and radical scavenging.Keywords
All Related Versions
- Version 1, 2024-12-18, ChemRxiv
- Published version: ACS Catalysis, 15 (7), 5577.
This publication has 41 references indexed in Scilit:
- Pt–CeO2-based composites in environmental catalysis: A reviewApplied Catalysis B: Environment and Energy, 2021
- Structural characterization and oxygen nonstoichiometry of ceria-zirconia (Ce1−xZrxO2−δ) solid solutionsActa Materialia, 2013
- CO oxidation over Pt/Ce–Zr oxide catalysts with low content of platinum and cerium componentsCatalysis Today, 2013
- Insights into the Redox Properties of Ceria‐Based Oxides and Their Implications in CatalysisChemInform, 2006
- The Dynamics of Oxygen Storage in Ceria–Zirconia Model Catalysts Measured by CO Oxidation under Stationary and Cycling Feedstream CompositionsJournal of Catalysis, 2000
- Redox Property–Local Structure Relationships in the Rh-Loaded CeO2–ZrO2Mixed OxidesJournal of Catalysis, 1999
- Nanophase Fluorite-Structured CeO2–ZrO2Catalysts Prepared by High-Energy Mechanical MillingJournal of Catalysis, 1997
- The effect of doping CeO2 with zirconium in the oxidation of isobutaneApplied Catalysis A: General, 1996
- Intrinsic size dependence of the phase transformation temperature in zirconia microcrystalsJournal of Materials Science, 1986
- Die Konstitution der Mischkristalle und die Raumf llung der AtomeThe European Physical Journal A, 1921