Dynamic mechanical response and thermal expansion of ceramic particle reinforced aluminium 6061 matrix composites
Authors:
- 1 November 1994
- journal article
- research article
- Published by Taylor & Francis in Philosophical Magazine A
- Vol. 70 (5) , 819-836
Abstract
The mechanical response of silicon carbide (SiC) particle and boron carbide (B4C) particle reinforced aluminium 6061 alloy was studied under quasi-static and dynamic loading conditions, using an Instron universal testing machine and split Hopkinson pressure bar respectively. The stiffness and yield strength of the B4C and SiC particle composites were significantly enhanced as compared to the unreinforced alloy. The strain hardening behaviour of the SiC particle reinforced composites was not significantly different as compared to that of the unreinforced alloy, at either low or high strain rates. On the other hand, the strength and strain hardening of the B4C particle reinforced composites was significantly greater than that of the unreinforced alloy, at both low and high strain rates. Differences in the mechanical behaviour of the two composites was attributed to the differences in the strength of the reinforcing particles and bonding between the B4C and SiC particles and the matrix alloy. Thermal expansion measurements carried out on the unreinforced alloy and composite samples attested to the findings of mechanical testing and microscopy.Keywords
This publication has 18 references indexed in Scilit:
- Dynamic mechanical response of a 1060 Al/Al2O3 compositeJournal of Materials Science, 1994
- Quench strengthening mechanism of ALSiC compositesScripta Metallurgica et Materialia, 1993
- An experimental and numerical study of deformation in metal-ceramic compositesActa Metallurgica, 1989
- Yield strength-fracture toughness relationships in metal matrix compositesScripta Metallurgica, 1987
- The wetting of solids by molten metals and its relation to the preparation of metal-matrix composites compositesJournal of Materials Science, 1987
- Discontinuously-reinforced aluminum matrix compositesComposites Science and Technology, 1987
- Analysis of stress-strain, fracture, and ductility behavior of aluminum matrix composites containing discontinuous silicon carbide reinforcementMetallurgical Transactions A, 1985
- Interfaces in metal matrix compositesScripta Metallurgica, 1984
- The strengthening of aluminum alloy 6061 by fiber and platelet silicon carbideMaterials Science and Engineering, 1984
- The Elastic and Thermo-elastic Properties of Composite MediaProceedings of the Physical Society. Section B, 1956