Fabrication of textured Bi-Sr-Ca-Cu-O thick film by electrophoretic deposition
Authors:
- 1 February 1991
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 69 (3) , 1775-1777
Abstract
Bi‐Sr‐Ca‐Cu‐O thick films (≊5–40 μm) were electrophoretically deposited on silver foil using ethyl alcohol as the suspending liquid. The deposition voltage was ≊70 V/cm and the current ≊550 μA/cm2. X‐ray diffraction of the as‐deposited sample shows texturing. This texturing was enhanced by pressing the film uniaxially at ≊82 MPa. Samples were sintered at 810 °C in a 10% oxygen‐in‐argon atmosphere. Liquid at the sintering temperature promotes textured grain growth. The critical current density (Jc) of the film determined by magnetic measurement at 5 K in a 2 kOe field is ≊1.3×104 A/cm2.Keywords
This publication has 8 references indexed in Scilit:
- Improvement in critical current density of Bi2Sr2Ca1Cu2Ox tapes synthesized by doctor-blade casting and melt growthApplied Physics Letters, 1990
- High-field critical current densities in Bi2Sr2Ca1Cu2O8+x/Ag wiresApplied Physics Letters, 1989
- Coating of superconducting.123 compound on silver substrate by electrophoretic techniquePhase Transitions, 1989
- Critical currents near 106 A cm-2 at 77 K in neutron-irradiated single-crystal YBa2Cu3O7Nature, 1989
- High‐T c Superconductor Coating on Metal Substrates by an Electrophoretic TechniqueJournal of the American Ceramic Society, 1989
- Fabrication of YBa2Cu3O7−y superconducting coatings by electrophoretic depositionApplied Physics Letters, 1989
- Anisotropic critical currents in Ba2YCu3O7 analyzed using an extended Bean modelApplied Physics Letters, 1989
- Metallurgical Studies and Optimization of Critical Crrent Density in Bi–(Pb)–Sr–Ca–Cu–O SuperconductorsJapanese Journal of Applied Physics, 1989