Synthesis and characterisation of microporous bimetallic Fe–Cr–Si–O materials derived from silsesquioxane precursors
- 16 September 2002
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry
- Vol. 12 (12) , 3792-3798
Abstract
Calcination of silsesquioxane mixtures of (c-C5H9)7Si7O9(OH)3, 1, (c-C5H9)7Si7O12Fe(CH3)2N(CH2)2N(CH3)2, 2, and (c-C5H9)7Si7O9(OSiMe3)O2CrO2, 3, led to microporous amorphous bimetallic Fe–Cr–Si–O materials with different Fe∶Cr ratios. A set of complementary characterisation techniques including N2 physisorption, XRD, XPS, RS, IR, HRTEM and Mössbauer spectroscopy were used to follow the variation of the textural properties, metal oxide dispersion and speciation with metal content. Fe–Cr–Si–O materials possess high surface areas and uniformly controlled micropores with an average pore size diameter of around 6–7 Å. Metal oxide speciation of calcined silsequioxane mixtures appears to be significantly different from that observed for these metals in the individually calcined metal silsesquioxanes. The iron oxide and monochromates are the predominant species in the calcined precursors 2 and 3 while very small particles (2–4 nm) of bimetallic mixed oxides are the major species in the Fe–Cr–Si–O materials. This suggests that the metal oxide species are highly interdispersed and can come into close contact with each other during the calcination procedure thus favoring the formation of the bimetallic mixed oxide phase. In contrast, a silica reference material containing 7% Fe and 3% Cr prepared via the impregnation method showed only chromate species and large particles (10–30 nm) of iron oxide. This suggests that metallasilsesquioxane mixtures may be used as versatile precursors for the preparation of silica-based catalysts containing very small and well dispersed particles of mixed metal oxides.Keywords
This publication has 37 references indexed in Scilit:
- Synthesis and Characterization of Microporous Fe−Si−O Materials with Tailored Iron Content from Silsesquioxane PrecursorsThe Journal of Physical Chemistry B, 2002
- Microporous Mg−Si−O and Al−Si−O Materials Derived from Metal SilsesquioxanesChemistry of Materials, 2001
- Chromium silsesquioxane based synthesis and characterization of a microporous Cr–Si–O materialPhysical Chemistry Chemical Physics, 1999
- Synthesis of Microporous Ti-Si-O Materials from a Titanium-containing OligosilsesquioxaneChemistry Letters, 1998
- Modelling the active sites of heterogeneous titanium-centred epoxidation catalysts with soluble silsesquioxane analoguesChemical Communications, 1997
- Electron microscope and raman characterization of the surface oxides formed on the FeCr alloys at 400–850°CMaterials Characterization, 1991
- Oxide Scale Formation on Iron-Chromium Alloys in Elevated Temperature Air EnvironmentsCorrosion, 1981
- Vibrational spectrum and force constants of the monochlorochromate ionSpectrochimica Acta, 1961
- The Determination of Pore Volume and Area Distributions in Porous Substances. I. Computations from Nitrogen IsothermsJournal of the American Chemical Society, 1951
- Adsorption of Gases in Multimolecular LayersJournal of the American Chemical Society, 1938