Corrosion of Carbon Steel and Other Steels In Simulated Boiling-Water Reactor Environment: Phase II
Authors:
- 1 October 1962
- journal article
- Published by Association for Materials Protection and Performance (AMPP) in Corrosion
- Vol. 18 (10) , 368t-377t
Abstract
Results are reported for the continuation1 of extensive corrosion testing of carbon and other steels exposed in a dynamic test loop simulating the various environments found in a nuclear boiling-water reactor system. Water and steam conditions were based on 10 to 20 ppm oxygen and 1 to 2 ppm hydrogen in the 546 F saturated steam, a condition representative of the radiolytic water decomposition in boiling-water reactors. The pH of the high-purity water was about 7, and no chemical additives were used in the loop water. Tests were conducted to determine (1) whether stress-corrosion cracking would occur and (2) the effect of simulated reactor startup and shutdown on corrosion, including pitting, rusting and local attack. The results of the investigation show that: (a) There was little, if any, difference in corrosion among the various steels tested containing up to 5 percent chromium. (b) Stress-corrosion cracking was not detected in steels containing up to 5 percent chromium or in austenitic and ferritic stainless steels, (c) Stress-corrosion cracking was detected in one specimen of hardened AISI Type 431 martensitic steel tested in steam-water environment. (d) Pitting, rusting and local attack of steels containing up to 5 percent chromium can occur in reactor-grade water during simulated reactor shutdowns when the water is at or near room temperature and has access to air. 6.2.3, 6.2.5, 3.5.8, 7.11.2, 8.4.5, 3.2.2.Keywords
This publication has 5 references indexed in Scilit:
- Corrosion of Carbon and Low-Alloy Steels In Out-of-Pile Boiling-Water-Reactor EnvironmentCorrosion, 1961
- Cracking of Low Carbon Steel By Ferric Chloride SolutionsCorrosion, 1960
- Chromium Electroplates for Corrosion Protection Of Stressed AISI 410 Steel In High Temperature, High Purity WaterCorrosion, 1960
- Stress Corrosion of Steels For Aircraft and MissilesCorrosion, 1960
- Relationship of Microstructure and Stress Corrosion Cracking of Type 410 Stainless SteelCorrosion, 1960