Effects of Deposits on Film Cooling of a Vane Endwall Along the Pressure Side
- 31 July 2008
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 130 (4) , 041006
Abstract
Film cooling is influenced by surface roughness and depositions that occur from contaminants present in the hot gas path, whether that film cooling occurs on the vane itself or on the endwalls associated with the vanes. Secondary flows in the endwall region also affect the film-cooling performance along the endwall. An experimental investigation was conducted to study the effect of surface deposition on film cooling along the pressure side of a first-stage turbine vane endwall. A large-scale wind tunnel with a turbine vane cascade was used to perform the experiments. The vane endwall was cooled by an array of film-cooling holes along the pressure side of the airfoil. Deposits having a semielliptical shape were placed along the pressure side to simulate individual row and multiple row depositions. Results indicated that the deposits lowered the average adiabatic effectiveness levels downstream of the film-cooling rows by deflecting the coolant jets toward the vane endwall junction on the pressure side. Results also indicated that there was a steady decrease in adiabatic effectiveness levels with a sequential increase in the number of rows with the deposits.Keywords
This publication has 22 references indexed in Scilit:
- Effects of Surface Deposition, Hole Blockage, and Thermal Barrier Coating Spallation on Vane Endwall Film CoolingJournal of Turbomachinery, 2006
- Adiabatic Effectiveness Measurements of Endwall Film-Cooling for a First-Stage VaneJournal of Turbomachinery, 2005
- Effect of Midpassage Gap, Endwall Misalignment, and Roughness on Endwall Film-CoolingJournal of Turbomachinery, 2005
- The Many Faces of Turbine Surface RoughnessJournal of Turbomachinery, 2001
- Scaling of Performance for Varying Density Ratio Coolants on an Airfoil With Strong Curvature and Pressure Gradient EffectsJournal of Turbomachinery, 2000
- Flowfield Measurements for a Highly Turbulent Flow in a Stator Vane PassageJournal of Turbomachinery, 1999
- Reviewing sulfidation corrosion—Yesterday and todayJOM, 1996
- An Approach for Evaluation of Gas Turbine DepositionJournal of Engineering for Gas Turbines and Power, 1992
- Surface Roughness Measurements on Gas Turbine BladesJournal of Turbomachinery, 1990
- Describing the uncertainties in experimental resultsExperimental Thermal and Fluid Science, 1988