Validation of a Laboratory Method for Evaluating Dynamic Properties of Reconstructed Equine Racetrack Surfaces
Authors:
Open Access
- 5 December 2012
- journal article
- research article
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 7 (12) , e50534
Abstract
Racetrack surface is a risk factor for racehorse injuries and fatalities. Current research indicates that race surface mechanical properties may be influenced by material composition, moisture content, temperature, and maintenance. Race surface mechanical testing in a controlled laboratory setting would allow for objective evaluation of dynamic properties of surface and factors that affect surface behavior. To develop a method for reconstruction of race surfaces in the laboratory and validate the method by comparison with racetrack measurements of dynamic surface properties. Track-testing device (TTD) impact tests were conducted to simulate equine hoof impact on dirt and synthetic race surfaces; tests were performed both in situ (racetrack) and using laboratory reconstructions of harvested surface materials. Clegg Hammer in situ measurements were used to guide surface reconstruction in the laboratory. Dynamic surface properties were compared between in situ and laboratory settings. Relationships between racetrack TTD and Clegg Hammer measurements were analyzed using stepwise multiple linear regression. Most dynamic surface property setting differences (racetrack-laboratory) were small relative to surface material type differences (dirt-synthetic). Clegg Hammer measurements were more strongly correlated with TTD measurements on the synthetic surface than the dirt surface. On the dirt surface, Clegg Hammer decelerations were negatively correlated with TTD forces. Laboratory reconstruction of racetrack surfaces guided by Clegg Hammer measurements yielded TTD impact measurements similar to in situ values. The negative correlation between TTD and Clegg Hammer measurements confirms the importance of instrument mass when drawing conclusions from testing results. Lighter impact devices may be less appropriate for assessing dynamic surface properties compared to testing equipment designed to simulate hoof impact (TTD). Dynamic impact properties of race surfaces can be evaluated in a laboratory setting, allowing for further study of factors affecting surface behavior under controlled conditions.Keywords
This publication has 16 references indexed in Scilit:
- Dynamic properties of a dirt and a synthetic equine racetrack surface measured by a track‐testing deviceEquine Veterinary Journal, 2012
- Effect of temperature on race times on a synthetic surfaceEquine Veterinary Journal, 2010
- Thermal transitions in high oil content petroleum-based wax blends used in granular sport surfacesThermochimica Acta, 2010
- Hoof accelerations and ground reaction forces of Thoroughbred racehorses measured on dirt, synthetic, and turf track surfacesAmerican Journal of Veterinary Research, 2009
- Effects of a synthetic all‐weather waxed track versus a crushed sand track on 3D acceleration of the front hoof in three horses trotting at high speedEquine Veterinary Journal, 2009
- Use of a 3D dynamometric horseshoe to assess the effects of an all‐weather waxed track and a crushed sand track at high speed trot: Preliminary studyEquine Veterinary Journal, 2009
- Influence of track surface on the equine superficial digital flexor tendon loading in two horses at high speed trotEquine Veterinary Journal, 2009
- Biomechanical and Mechanical Investigations of the Hoof-Track Interface in Racing HorsesVeterinary Clinics of North America: Equine Practice, 2008
- The epidemiology of Thoroughbred racehorse injuriesClinical Techniques in Equine Practice, 2003
- Interrelationships between moisture content of the track, dynamic properties of the track and the locomotor forces exerted by galloping horsesJournal of Equine Veterinary Science, 1997