The effect of silica nanoparticles and carbon nanotubes on the toughness of a thermosetting epoxy polymer
Open Access
- 26 August 2010
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 119 (4) , 2135-2142
Abstract
Silica nanoparticles and multiwalled carbon nanotubes (MWCNTs) have been incorporated into an anhydride‐cured epoxy resin to form “hybrid” nanocomposites. A good dispersion of the silica nanoparticles was found to occur, even at relatively high concentrations of the nanoparticles. However, in contrast, the MWCNTs were not so well dispersed but relatively agglomerated. The glass transition temperature of the epoxy polymer was 145°C and was not significantly affected by the addition of the silica nanoparticles or the MWCNTs. The Young's modulus was increased by the addition of the silica nanoparticles, but the addition of up to 0.18 wt % MWCNTs had no further significant effect. The addition of both MWCNTs and silica nanoparticles led to a significant improvement in the fracture toughness of these polymeric nanocomposites. For example, the fracture toughness was increased from 0.69 MPam1/2 for the unmodified epoxy polymer to 1.03 MPam1/2 for the hybrid nanocomposite containing both 0.18 wt % MWCNTs and 6.0 wt % silica nanoparticles; the fracture energy was also increased from 133 to 204 J/m2. The mechanisms responsible for the enhancements in the measured toughness were identified by observing the fracture surfaces using field‐emission gun scanning electron microscopy. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011Keywords
This publication has 24 references indexed in Scilit:
- Dynamic properties of sandwich beams with MWNT/polymer nanocomposites as core materialsComposites Science and Technology, 2008
- On nanocomposite toughnessComposites Science and Technology, 2008
- Toughness of syndiotactic polystyrene/epoxy polymer blends: microstructure and toughening mechanismsPolymer, 2005
- Carbon nanotube-reinforced epoxy-composites: enhanced stiffness and fracture toughness at low nanotube contentComposites Science and Technology, 2004
- Prospects for nanotube and nanofibre compositesComposites Science and Technology, 2004
- Physical interactions at carbon nanotube-polymer interfacePolymer, 2003
- Helical microtubules of graphitic carbonNature, 1991
- Toughening mechanisms in elastomer-modified epoxiesJournal of Materials Science, 1986
- Deformation and fracture behaviour of a rubber-toughened epoxy: 1. Microstructure and fracture studiesPolymer, 1983
- Phase separation in epoxy resins containing polyethersulphonePolymer, 1983