Evaporation and Ignition Characteristics of Water Emulsified Diesel under Conventional and Low Temperature Combustion Conditions
Open Access
Abstract
The combination of emulsified diesel and low temperature combustion (LTC) technology has great potential in reducing engine emissions. A visualization study on the spray and combustion characteristics of water emulsified diesel was conducted experimentally in a constant volume chamber under conventional and LTC conditions. The effects of ambient temperature on the evaporation, ignition and combustion characteristics of water emulsified diesel were studied under cold, evaporating and combustion conditions. Experimental results showed that the ambient temperature had little effect on the spray structures, in terms of the liquid core length, the spray shape and the spray area. However, higher ambient temperature slightly reduced the Sauter Mean Diameter (SMD) of the spray droplets. The auto-ignition delay time increased significantly with the decrease of the ambient temperature. The ignition process always occurred at the entrainment region near the front periphery of the liquid core. This entrainment region was evolved from the early injected fuel droplets which were heated and mixed by the continuous entrainment until the local temperature and equivalence ratio reached the ignition condition. The maximum value of integrated natural flame luminosity (INFL) reduced by 60% when the ambient temperature dropped from 1000 to 800 K, indicating a significant decrease of the soot emissions could be achieved by LTC combustion mode than the conventional diesel engines.Keywords
This publication has 35 references indexed in Scilit:
- Conceptual models for partially premixed low-temperature diesel combustionProgress in Energy and Combustion Science, 2013
- Experimental investigation of the performance and emission characteristics of direct injection diesel engine by water emulsion diesel under varying engine load conditionApplied Energy, 2013
- Soot formation, spray characteristics, and structure of jet spray flames under high pressureCombustion and Flame, 2011
- Experimental study of soot and temperature field structure of laminar co-flow ethylene–air diffusion flames with nitrogen dilution at elevated pressuresCombustion and Flame, 2011
- An experimental investigation on spray, ignition and combustion characteristics of biodieselsProceedings of the Combustion Institute, 2011
- Experimental study of inlet manifold water injection on combustion and emissions of an automotive direct injection Diesel engineEnergy, 2010
- Engine performance using emulsified diesel fuelEnergy Conversion and Management, 2010
- An experimental investigation of the breakup characteristics of secondary atomization of emulsified fuel dropletEnergy, 2010
- Soot in diesel fuel jets: effects of ambient temperature, ambient density, and injection pressureCombustion and Flame, 2004
- Numerical and experimental study of water/oil emulsified fuel combustion in a diesel engineFuel, 2002