Intermediate layer, microstructure and mechanical properties of aluminum alloy/stainless steel butt joint using laser–MIG hybrid welding–brazing method
Authors:
- 26 July 2017
- journal article
- research article
- Published by World Scientific Pub Co Pte Ltd in International Journal of Modern Physics B
- Vol. 31 (16-19)
Abstract
Butt joining of AA6061 aluminum (Al) alloy and 304 stainless steel of 2-mm thickness was conducted using laser–MIG hybrid welding–brazing method with ER4043 filler metal. To promote the mechanical properties of the welding–brazing joints, two kinds of intermediate layers (Al–Si–Mg alloy and Ag-based alloy) are used to adjust the microstructures of the joints. The brazing interface and the tensile strength of the joints were characterized. The results showed that the brazing interface between Al alloy and stainless steel consisted of double layers of Fe2Al5 (near stainless steel) and Fe4Al[Formula: see text] intermetallic compounds (IMCs) with a total thickness of 3.7 [Formula: see text]m, when using Al–Si–Mg alloy as the intermediate layer. The brazing interface of the joints using Ag-based alloy as intermediate layer also consists of double IMC layers, but the first layer near stainless steel was FeAl2 and the total thickness of these two IMC layers decreased to 3.1 [Formula: see text]m. The tensile strength of the joints using Al–Si–Mg alloy as the intermediate layer was promoted to 149 MPa, which was 63 MPa higher than that of the joints using Al–Si–Mg alloy as the intermediate layer. The fractures occurred in the brazing interface between Al alloy and stainless steel.Keywords
This publication has 9 references indexed in Scilit:
- Effect of auxiliary TIG arc on formation and microstructures of aluminum alloy/stainless steel joints made by MIG welding-brazing processTransactions of Nonferrous Metals Society of China, 2014
- Development of novel CsF–RbF–AlF3 flux for brazing aluminum to stainless steel with Zn–Al filler metalMaterials & Design (1980-2015), 2014
- Effect of input current modes on intermetallic layer and mechanical property of aluminum–steel lap joint obtained by gas metal arc weldingMaterials Science and Engineering: A, 2013
- Improving arc joining of Al to steel and Al to stainless steelMaterials Science and Engineering: A, 2012
- Spreading behavior and microstructure characteristics of dissimilar metals TIG welding–brazing of aluminum alloy to stainless steelMaterials Science and Engineering: A, 2009
- Joining of aluminum alloy to steel by friction stir weldingJournal of Materials Processing Technology, 2006
- Friction stir welding of dissimilar Al 6013-T4 To X5CrNi18-10 stainless steelMaterials & Design (1980-2015), 2005
- Diffusion bonding of aluminium oxide to stainless steel using stress relief interlayersMaterials Science and Engineering: A, 2002
- Ultrasonic butt welding of aluminum, aluminum alloy and stainless steel plate specimensUltrasonics, 2002