Effects of the peracetic acid and sodium hypochlorite on the colour stability and surface roughness of the denture base acrylic resins polymerised by microwave and water bath methods
- 9 April 2012
- journal article
- Published by Wiley in Gerodontology
- Vol. 30 (1) , 18-25
Abstract
Objective: This study evaluated the surface roughness (Ra) and color stability of acrylic resin colors (Lucitone 550, QC‐20 and Vipi‐Wave) used for fabricating bases for complete, removable dentures, overdentures and prosthetic protocol after immersion in chemical disinfectants (1% sodium hypochlorite and 2% peracetic acid) for 30 and 60 minutes.Material and Methods: Sixty specimens were made of each commercial brand of resin composite, and divided into 2 groups according to the chemical disinfectants. Specimens had undergone the finishing and polishing procedures, the initial color and roughness measurements were taken (t=0), and after this, ten test specimens of each commercial brand of resin composite were immersed in sodium hypochlorite and ten in peracetic acid, for 30 and 60 minutes, with measurements being taken after each immersion period. These data were submitted to statistical analysis.Results: There was evidence of an increase in Ra after 30 minutes immersion in the disinfectants in all the resins, with QC‐20 presenting the highest Ra values, and Vipi‐Wave the lowest. After 60 minutes immersion in the disinfectants all the resins presented statistically significant color alteration.Conclusions: Disinfection with 1% sodium hypochlorite and peracetic acid altered the properties of roughness and color of the resins.Keywords
This publication has 39 references indexed in Scilit:
- Effects of Ethanol on the Surface and Bulk Properties of a Microwave‐Processed PMMA Denture Base ResinJournal of Prosthodontics, 2009
- The Effect of Polymerization Cycles on Color Stability of Microwave‐Processed Denture Base ResinJournal of Prosthodontics, 2009
- Evaluation of the effectiveness of peracetic acid in the sterilization of dental equipmentIndian Journal of Medical Microbiology, 2008
- Comparative study of the transverse strength of three denture base materialsJournal of Dentistry, 2007
- Flexural strength of acrylic resins polymerized by different cyclesJournal of Applied Oral Science, 2007
- Physical Properties of Denture Base Resins Potentially Resistant to Candida AdhesionJournal of Prosthodontics, 2007
- The Effect of Brushing on Surface Roughness of Denture Lining MaterialsJournal of Prosthodontics, 2007
- Effect of Disinfectants on the Hardness and Roughness of Reline Acrylic ResinsJournal of Prosthodontics, 2006
- Surface Roughness of Denture Base Acrylic Resins After Processing and After PolishingJournal of Prosthodontics, 2006
- Surface roughness of acrylic resins submitted to mechanical and chemical polishingJournal of Oral Rehabilitation, 2004